C076 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius

The Trend CraftPro Bearing Guided Ovolo Round Over Cutter for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.The 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating...

Trend TRETSQ T-Square

This robust T-Square in Tufnol provides an instant means of squaring off, marking out, setting up jigs etc. Can be hung up when not in use. Length: 680mm.

Universal Plunge Router Sub-Base

The Trend Universal Plunge Router Sub-Base unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide Bushes. Made from reinforced nylon for a low-friction, precise routing surface. The Precision Centring System ensures perfect concentricity between cutter and guide bush for pinpoint accuracy with routing jigs. Reinforced threaded brass inserts provide secure mounting points for guide bushes. The Quick Pattern Finder makes locating...

Trend TRE6204WS Countersinks

Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals.

Trend TRESTEALTHSM AIR STEALTH Half Mask

The Trend AIR STEALTH Half Mask has a low-profile ergonomic design that offers less breathing resistance. Manufactured from high-grade materials, odour free, non-allergenic. Protects the user against airborne particles, oil aerosols, mist, welds and fumes. The twin HEPAC pleat encapsulated design filter provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above. The TPE mask body is latex and silicone-free. An exhalation...

Trend TRESNAPPC12 Snap Plug Cutters

Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.

Trend TREFTSSP FAST TRACK Replacement Stone

Trend FAST TRACK Replacement Stones are made from monocrystalline diamond with a unique diamond cross relief pattern for optimal abrasion rates. This helps to maximise sharpening efficiency and reduce clogging. Diamonds are held by nickel plating to a steel substrate, with ABS plastic base.

Trend TRECSB8520 CraftPro Mini Saw Blade

The Trend CraftPro Mini Saw Blade has been designed to provide a professional finish in particle board, plywood, MDF and hardboard. It has a thin kerf, ideal for use in cordless saws. The high-grade, alloy steel plate body has been precision ground to maintain flatness. Silver brazing ensures tips are securely bonded to body. With a reamed bore to ensure a precise spindle fit. Laser...

Trend TREKWJ700 Kitchen Worktop Jigs

The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up. The jig has the following features: Left and right hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps....

Trend TRESNAPDBG5 Snap Centring Guides

These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.

Trend TREPT1603P CraftPro Panel Trim Saw Blade

The Trend CraftPro Plunge Saw Blade is designed to provide a professional finish in particle board, plywood, MDF and hardboard. It has a high-grade, hardened and tempered, alloy steel plate body that has been precision ground to maintain flatness. Silver brazed to ensure tips are securely bonded to body. With a reamed bore to ensure a precise spindle fit. Laser etched on reverse to European...

Trend TRECSB1653PB CraftPro Cordless Saw Blade Triple Pack

Trend CraftPro Cordless Saw Blade, designed for a professional finish in softwood, hardwood, plasterboard, stone fibreboard, particle board, veneer, plywood, MDF and hardboard. Thin kerf, ideal for cordless saws. High-grade alloy steel plate body precision ground to maintain flatness. Silver brazed to ensure tips are securely bonded to body. With a reamed bore to ensure a precise spindle fit. Laser etched on reverse to European...

Trend TRECSB1603P CraftPro Plunge Saw Blade

The Trend CraftPro Plunge Saw Blade is designed to provide a professional finish in particleboard, plywood, MDF and hardboard. It has a high-grade, hardened and tempered, alloy steel plate body which has been precision ground to maintain flatness. Silver brazed to ensure tips are securely bonded to the body, and with a reamed bore to ensure a precise spindle fit.Laser-etched on the reverse to European...

Trend TREC15212TC Biscuit Jointer Set, Craft Pro

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm...

Trend TREC07814TC CraftPro Round Over Two Flute Cutter, 1/4in Shank

The Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curved edges. With two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. A PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller...