Trend TRE32LFILTP5 T32 Micro Filter Bags (Pack 5)

Trend T32 Micro Filter Bag has multiple inner layers that collect coarse dust and dirt particles whilst protecting the outer layer from clogging. The bag material has a greater air-permeable structure when compared to paper filter bags, providing increased suction. For dry use only. Supplied as a pack of 5.

Trend TRE10H114TC 10H/1 x 1/4 TCT Pin Guided Chamfer / Bevel 45° 10 .0 x 14.0mm

These types of cutter are used for edging and chamfer cutting on man made fibre boards, natural timbers and plastics.Tools are offered to produce various angles for chamfering. Pin guarded cutters enable curved work to be undertaken, bearings running along the board edge or a template.Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T1/4in Shank.A = 45° C1 = 10...

Trend TRE32114HS 3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm

Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel, ground with a very fine edge. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Suitable for non abrasive materials, but will give a superior finish in soft timbers. Specification D: 6.3mm (1/4in)C:...

Trend TRE33712TC 337 x 1/2 TCT Tongue & Groove Set 6.35mm x 10.0mm

This Trend 337 x 1/2 tc is a one-piece tongue and groove set. The parts are inter-changed on the Arbor to alter the set up. It has a maximum timber thickness 22 mm and Minimum timber thickness 15 mm. Instructions for use are supplied. TCT. 1/2in Shank. D: 41 mm.C: 6.35 mm.C2: 10 mm.E: 22 mm.OL: 76 mm.    

Trend TRE4639012TC 46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm

This Trend 46/390x1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is supplied as standard with ref: BR/191 fitted.There are a variety of bearing rings available to give various rebate sizes. These rings are secured between the two bearings. D: 50.8 mm.C: 22.5 mm.B: 12.7 mm.E: 19.1 mm.E: 15.9 mm.OL: 78 mm. Specifications:...

Trend TRECRPB29 CR/PB29 CraftPro Planer Blades 82mm (Pack 2)

Upgrade your woodworking projects with the Trend TRECRPB29 CR/PB29 CraftPro Planer Blades (Pack of 2), specifically designed for precision and durability. These high-grade, solid carbide planer blades measure 82mm and are a perfect addition to your Power Tool Accessories collection. With their precision ground edges, they promise superior performance that sets them apart in the Planer Blades category. Each blade features two cutting edges, allowing...

Trend TRESNAPTH2SE SNAP/TH2/SET Tool Holder Bit Set, 60 Piece

Trend Snappy Tool Holder is supplied with the Snappy Quick Change Chuck for fast, efficient bit swaps ensuring increased productivity and performance. Includes a selection of accessories for drilling in wood, masonry and steel, plus specialist bits for specific tasks such as lock fitting and metalwork applications. Supplied in a heavy-duty fabric tool holder. Contains: 1 x Standard Quick Chuck4 x Masonry Bits: 5, 6,...

Trend TREPHJIG Pocket Hole Jigs

The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes with a variable pitch of 29 to 63mm. Use on timber, MDF, plywood and blockboard. It allows a variety of joints to be created individually. Uses square drive self-tapping screws. Workpiece can be handled immediately after gluing and screwing, creating time-saving...

Trend TREDAR200 Digital Angle Rule

This Trend Digital Angle Rule calculates angles quickly and accurately and is ideal for woodworking, construction and machining. The rule is made from stainless steel with both metric and imperial scale. It has a rule locking function, and is easy to operate. The rule will automatically shut off in 6 minutes. Specification Measuring Range: 0° to 360°Resolution: 0.1°Accuracy: 0.3°

Trend TREC20914TC Bearing Guided Intumescent Strip Cutter

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion...

Trend TREC12114TC Bearing Guided Template Profile Cutter

Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive...

Trend TREC17212TC CraftPro Two Flute Cutters, 1/2in Shank

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads, ideal for router table work and for use in bigger routers. The 'K' mark shank ensures safe...

Trend TREC11614TC 90° Bearing Guided Trimmer Cutter

Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TCT.

Trend TREC00114TC CraftPro Two Flute Cutters, 1/4in Shank

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide...

Trend TRETR1214TC Two Flute Cutter, Extra Long Shank

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood...