Trend TRE20114TC Single Flute Cutter TCT, 1/4in

Trend Single Flute Cutters are chosen for fast, free cutting when cutting speed takes preference over finish. If you require a cleaner cut, two flute cutters are recommended. Suitable for grooving, rebating, morticing and drilling. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute...

Trend TRE241014TC 24/ Plug Makers

These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min.

Trend TRE11314HS 45° Chamfer V-Groove Cutter

Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.

Trend TRE12314TC Radius Cutter

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards.

Trend TREFTSMK2 FAST TRACK™ MK2 Sharpener

Trend FAST TRACK™ MK2 Sharpener for consistent edges on chisels and plane irons. With 4 honing angles for increased honing and edge reshaping options. Consistent sharpening angle promotes tool life and creates a perfect square edge with a flat ground finish. Laterally sharpened edges are more durable and less prone to fracturing. Magnetic stone holders keep each stone securely in place for safe, easy operation....

Trend TRE461712TC Bearing Guided Ovolo & Round Over Cutters

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk...

C041A x 1/4 TCT Dovetail 104° 12.7 x 12.7mm

Trend Craft Pro Dovetail Cutters are designed for use with commercial dovetailing and stair housing jigs. They are also used to produce sliding and lapped dovetails, through dovetails and end on dovetails.Suitable for use on natural timbers and man-made boards.The Trend C041A x 1/4 TCT Dovetail has the following specification: Cutter Angle: 104°Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 12.7mm (1/2in)Overall Length: 60.5mmShank Diameter: 1/4in

Trend TREC04414TC C044 x 1/4 TCT CraftPro Chamfer V-Groove Cutter 45° 6.0 x 12.7mm

The Trend CraftPro Chamfer V-Groove Cutter has two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Its 45° 'V' groove profile is ideal for false panel work and match board grooving details. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity. Fitted with a 1/4in 'K'mark shank...

Trend TRE101112TC 10/11 x 1/2 TCT V-Groove Chamfer 45° 19.0 x 38mm

These type of cutters are used for edging, grooving, veining work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V-grooving. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T.Shank 1/2in.A = 45° D = 38 mmC1 = 19 mmC2 = 26.5 mm

Trend TRETR2914TC TR29 x 1/4 TCT Shank Mounted Bearing Guided Profiler 12.7 x 25.4mm

Trend TR29 Trade range Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber, man-made board. Features 2 mm micrograin tungsten carbide tips, for cutting the most abrasive materials to give extra long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board and has...

Trend TRET420358TC T420/35 x 8mm TCT Hinge Sinking 35mm Diameter

Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm.Shank. 8mm.

Trend TRESNAPQC SNAP/QC Quick Chuck

The Quick Chuck will fit any power drill that uses a standard 9.5 mm (3/8in) key or keyless chuck. Attachments such as the snappy range or direct drive 1/4in screwdriver bits will then snap in and out without a chuck key. The Quick Chuck has six flats on the shank to ensure non-slippage in the chuck.

Trend TREVJSAG36 Vari Jig Angle Guide VJSAG36

The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45º, 60º, 90º, 120º, 135º and 150º. The router working length at 90º is 915mm (36 inch), the circular saw working length at 90º is 780mm (30 3/4 inch). It...

Trend TRETR2812TC TR28 x 1/2 TCT Bearing Guided Trimmer 12.7 x 50mm

The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lipping’s and plastic laminate edges. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring.The dimensions are etched on the extra-long 40mm shanks for quick identification. Specifications::Shank: 1/2in.Cutting Diameter: 12.7mm.Cutting...

Trend TRETR3012TC TR30 x 1/2 TCT Shank Mounted Bearing Guided Profiler 19.1 x 50mm

Trend TR30 Trade Shank Mounted Guided Profiler with extra-long shank ideal for trimming and profiling timber, man-made board. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring.The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board, and has the dimensions etched on...