C041A x 1/4 TCT Dovetail 104° 12.7 x 12.7mm

Trend Craft Pro Dovetail Cutters are designed for use with commercial dovetailing and stair housing jigs. They are also used to produce sliding and lapped dovetails, through dovetails and end on dovetails.Suitable for use on natural timbers and man-made boards.The Trend C041A x 1/4 TCT Dovetail has the following specification: Cutter Angle: 104°Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 12.7mm (1/2in)Overall Length: 60.5mmShank Diameter: 1/4in

C076 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius

The Trend CraftPro Bearing Guided Ovolo Round Over Cutter for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.The 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating...

Mesh Random Orbital Sanding Discs 225mm

Experience superior sanding efficiency with the Trend 225mm Mesh Random Orbital Sanding Discs, specifically designed for professionals and DIY enthusiasts alike. These premium abrasive discs utilize silicon carbide grit, allowing for a lifespan that is 5 times longer than conventional abrasives. This exceptional durability ensures enhanced performance across various materials, making them a must-have in your Sanding & Polishing toolkit. One of the standout features...

Trend TRE101112TC 10/11 x 1/2 TCT V-Groove Chamfer 45° 19.0 x 38mm

These type of cutters are used for edging, grooving, veining work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V-grooving. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T.Shank 1/2in.A = 45° D = 38 mmC1 = 19 mmC2 = 26.5 mm

Trend TRE10H114TC 10H/1 x 1/4 TCT Pin Guided Chamfer / Bevel 45° 10 .0 x 14.0mm

These types of cutter are used for edging and chamfer cutting on man made fibre boards, natural timbers and plastics.Tools are offered to produce various angles for chamfering. Pin guarded cutters enable curved work to be undertaken, bearings running along the board edge or a template.Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T1/4in Shank.A = 45° C1 = 10...

Trend TRE11314HS 45° Chamfer V-Groove Cutter

Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.

Trend TRE12314TC Radius Cutter

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards.

Trend TRE20114TC Single Flute Cutter TCT, 1/4in

Trend Single Flute Cutters are chosen for fast, free cutting when cutting speed takes preference over finish. If you require a cleaner cut, two flute cutters are recommended. Suitable for grooving, rebating, morticing and drilling. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute...

Trend TRE241014TC 24/ Plug Makers

These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min.

Trend TRE30114TC Two Flute Cutter TCT, 1/4in

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend TRE320L14TC Two Flute Cutter D-Namic Carbide, 1/4in

Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass.

Trend TRE32114HS 3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm

Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel, ground with a very fine edge. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Suitable for non abrasive materials, but will give a superior finish in soft timbers. Specification D: 6.3mm (1/4in)C:...

Trend TRE32LFILTP5 T32 Micro Filter Bags (Pack 5)

Trend T32 Micro Filter Bag has multiple inner layers that collect coarse dust and dirt particles whilst protecting the outer layer from clogging. The bag material has a greater air-permeable structure when compared to paper filter bags, providing increased suction. For dry use only. Supplied as a pack of 5.

Trend TRE33412TC 334 x 1/2 TCT Aquamac Recessor

This Trend 334 x 1/2 TCT Aquamac 21 Recessor, cutter, is designed for use with the seal in a wiping mode and comes complete with a guide bearing to reduce setting-up time and simplify machining operations. It is MEC mechanical feed only. Specifications: Size: 46.3mm diameter x 10.3mm cut shank 1/2in TCT. D: 46.3 mm.D2: 4.3 mm.C: 10.3 mm.C2: 2.7 mm.OL: 90 mm.B: 28.6 mm....

Trend TRE336014 Arbor Standard Duty 33/60 x 1/4

For use with Trend bearings and slotters. 1/4in shank. Includes: 1 x Arbor1 x Spacer 5mm3 x Spacer 3mm