Trend TRET420358TC T420/35 x 8mm TCT Hinge Sinking 35mm Diameter

Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm.Shank. 8mm.

Trend TRET4213514T T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in

Trend TRETR1214TC Two Flute Cutter, Extra Long Shank

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood...

Trend TRETR2812TC TR28 x 1/2 TCT Bearing Guided Trimmer 12.7 x 50mm

The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lipping’s and plastic laminate edges. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring.The dimensions are etched on the extra-long 40mm shanks for quick identification. Specifications::Shank: 1/2in.Cutting Diameter: 12.7mm.Cutting...

Trend TRETR2914TC TR29 x 1/4 TCT Shank Mounted Bearing Guided Profiler 12.7 x 25.4mm

Trend TR29 Trade range Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber, man-made board. Features 2 mm micrograin tungsten carbide tips, for cutting the most abrasive materials to give extra long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board and has...

Trend TRETR3012TC TR30 x 1/2 TCT Shank Mounted Bearing Guided Profiler 19.1 x 50mm

Trend TR30 Trade Shank Mounted Guided Profiler with extra-long shank ideal for trimming and profiling timber, man-made board. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring.The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board, and has the dimensions etched on...

Trend TRETR3514TC TR35 x 1/4 TCT Biscuit Jointer Set 4.0 x 37.2mm

The Trend TR35 Biscuit Jointer Set enables biscuit jointing with timber, man-made fibre and particle board. The right choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0, 10 & 20. Specifications:Shank: 1/4in.Cutting Diameter (D): 37.2mm.Cutting Length (C): 4.0mm.

Trend TRETSQ T-Square

This robust T-Square in Tufnol provides an instant means of squaring off, marking out, setting up jigs etc. Can be hung up when not in use. Length: 680mm.

Trend TREUNIBASTRM UNIBASE/TRIM Universal Trim Router Sub-Base 150mm

The Trend UNIBASE/TRIM Universal Trim Router Sub-Base unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide Bushes. With 9 Hole Patterns to suit most 1/4in trim routers, including 18V cordless models. Made from reinforced nylon for a low-friction, precise routing surface.The Precision Centring System ensures perfect concentricity between cutter and guide bush for pinpoint accuracy with routing jigs. Reinforced threaded brass...

Trend TREVJSAG36 Vari Jig Angle Guide VJSAG36

The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45º, 60º, 90º, 120º, 135º and 150º. The router working length at 90º is 915mm (36 inch), the circular saw working length at 90º is 780mm (30 3/4 inch). It...

Trend TREVJSCG36 VJS/CG/36 Clamp Guide 36in

The Guide Clamp features integral clamping jaws and a locking lever that provides quick way of clamping the guide batten. It is ideal for holding and clamping workpieces and the aluminium extrusion incorporating T-slots. The clamp is fitted with a metric/imperial scale for setting lengths and stop positions and the scale can be be positioned by removing 20mm of the self-adhesive backing.

Universal Plunge Router Sub-Base

The Trend Universal Plunge Router Sub-Base unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide Bushes. Made from reinforced nylon for a low-friction, precise routing surface. The Precision Centring System ensures perfect concentricity between cutter and guide bush for pinpoint accuracy with routing jigs. Reinforced threaded brass inserts provide secure mounting points for guide bushes. The Quick Pattern Finder makes locating...

Zirconium Orbital Sanding Discs 225mm

Introducing the Zirconium Orbital Sanding Discs 225mm, a premier choice in the sanding and polishing category, specifically designed for those who demand high performance and durability. Crafted with a multi-material, long-life zirconium abrasive, these sanding discs excel in a variety of applications, ensuring that your projects achieve a smooth and professional finish. Key features of the Zirconium Orbital Sanding Discs include: Self-Sharpening Grit: The unique...