Trend TRE621014TC 62/10 x 1/4 TCT Drill / Countersink / Counterbore

These combination tools in TCT can be used in abrasive materials.They will drill, countersink and finally counterbore a parallel hole.Designed to receive plug maker group 24.The drill diameter sizes are for a clearance hole only.For use with drilling machines or routers. Specifications: T.C.T.1/4in Shank.Woodscrew Size. No.10.Drill Diameter 7/32in.Countersink Diameter. 12mm.Drill Length. 20mm.

Trend TRE63127 Collet Sleeves

Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.

Trend TRE70114TC 7/01 x 1/4 TCT Ovolo & Round Over 2.5mm Radius

Ovolo and rounding over cutters are ideal for panel work and edge moulding, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to...

Trend TRE7E214TC Pin Guided Rounding Over Cutter

Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to...

Trend TRE97114TC 9/7 Bearing Guided Corner Bead Cutter

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.

Trend TREAIRP6A AirPro Max Ear Defenders

Trend AirPro Max Ear Defenders for use with the Airshield Pro (AIR/PRO) and AirPro Max (AIR/PRO/M) powered respirators. The easy clip-on adaptor system ensures a secure fit. Comfortable, durable and lightweight design for longer life. Fitted with soft foam-covered cushions for increased user comfort. SNR Rating: 29 dB

Trend TREAIRPM1 AirPro Max THP3 Filter

The Trend AirPro Max THP3 Filter provides respiratory protection to BS EN 12941:1999. Covers all types of dust generated when working in hard and softwoods, ply, MDF and other timber-based materials. Simple to swap over, the filters ensure you are always guaranteed full protection from harmful dust. It has a nominal protection factor of 500.

Trend TREAIRPRO Airshield Pro Powered Respirator

The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941. New features include:Combination face-seal and hood to improve protection.Motor positioned away from the sensitive area of the forehead to reduce noise and irritation.Attachment points for optional ear defenders.Strategic component distribution ensures...

Trend TREANGLEFIX Anglefix Mitre Guide

The Trend Anglefix is a must have accessory for quick, accurate mitre saw setup when cutting mitres. It is simple to use, the desired angle is taken by wrapping around the desired internal or external corner.The central metal tab automatically bisects the angle taken for fast setting without any measurements or additional tools. This anglefix is ideal for setting mitre angles for skirting, architrave, dado...

Trend TREB16 Replacement Bearings

Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.

Trend TREBSC0100 Jointing Biscuits

Trend Jointing Biscuits are made of laminated beech which is compressed before being die-cut. Beechwood biscuits expand up to 20% when in contact with wood adhesives. Biscuit jointing has been proven to be one of the strongest, fastest, safest and most accurate ways to join hardwood, softwood, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise.

Trend TREC00114TC CraftPro Two Flute Cutters, 1/4in Shank

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide...

Trend TREC04014TC C040 x 1/4 TCT Bearing Guided Rebater 35.0mm

This Trend Craft Pro 1/4in shank Bearing Guided Rebater, router cutter, has a 35mm diameter and two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.It has a bottom bearing guide for cutting rebates on curved and straight work with accuracy and ease.This cutter is supplied with two bearings for 11.1 and 12.7mm wide rebates for...

Trend TREC04414TC C044 x 1/4 TCT CraftPro Chamfer V-Groove Cutter 45° 6.0 x 12.7mm

The Trend CraftPro Chamfer V-Groove Cutter has two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Its 45° 'V' groove profile is ideal for false panel work and match board grooving details. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity. Fitted with a 1/4in 'K'mark shank...

Trend TREC04914TC C049 x 1/4 TCT Bearing Guided Chamfer Cutter 45° 12.7 x 32mm

The Trend CraftPro Bearing Guided Chamfer Cutter for edging and chamfer cutting, on man-made fibreboards, natural timbers and plastics. It has two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Follows straight and curved profiles for crisp, professional detailing work on an edge. The PTFE coating minimises heat and resin build-up for increased cutter...