Trend TREDEAL10 Kitchen Worktop Cutter Display of 10

Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter.TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Advanced automated grinding improves the carbides resistance to wear.Up to 200% longer life when cutting abrasive materials.Cleaner cut than other existing carbides.Final results & life that makes it the most cost effective carbide today. Includes 10 x 383DX12TC Cutters in...

Trend TREDEALBR01 BR01 1/2in 50mm Kitchen Worktop Cutter Display (30 Cutters)

The Trend Kitchen Worktop Cutter Display contains: 30 x BR01 1/2in 50mm Kitchen Worktop Cutters.  Ideal for general purpose trimming & mortising. For use with Trend Worktop Jigs for cutting worktop joints, bolt recesses and sink/hob apertures in laminated chipboard and solid timber. Tungsten Carbide tipped 1.5mm micro-granular tips provide long cutter life. The ground tip face has been polished to 400-grit ensures accurate cutting....

Trend TREDEALCRA Small Craft Cabinet Deal 75 Pieces

This Trend Small Craft Cabinet Deal contains the following: 3 x C005 x 1/4 TCT Two Flute Cutters 6.0 x 16.0mm 3 x C008 x 1/4 TCT Two Flute Cutters 6.3 x 25.4mm 3 x C012A x 1/4 TCT Two Flute Cutters 8.0 x 25.0mm 3 x C016 x 1/4 TCT Two Flute Cutters 10.0 x 19.1mm 3 x C019A x 1/4 TCT Two Flute...

Trend TREDLIFTA Door Lifter A

This Trend foot operated Tredlifta Lifter A is used to support the door while fitting into the door frame, it is foot operated freeing up the users’ hands. It slides under the door, stays flat and stable until ready to activate the lift with the user’s foot.It will lift 38mm high and hold a maximum weight of 108kg.Made from plastic and non-marring, they have a...

Trend TREDSTAND Door Stand 32mm - 55mm D/STAND/A

The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door to be tilted back to assist fitting into the frame. Maximum door weight 50kg.

Trend TREDWSLF100 DWS/LF/100 Lapping Fluid 100ml

Trend's Lapping Fluid is designed solely for use in the engineering industry and is suitable with all quality diamond abrasive products. Use this instead of water to reduce the threat of rusting by 95%. It reduces the possibility of clogging, excessive build-up of residue and improves diamond performance.It has penetrating qualities and oil/water solubility, which not only increases the cutting action but also assures superior...

Trend TREESCRIBE EASYSCRIBE Scribing Tool

The Trend EASYSCRIBE is a handheld scribing tool for architrave, skirting, scribing doors, scribing worktops, setting hinge recess depth, etc. Fitted with an articulated arm that allows the required offset to be set precisely, from 1mm to 40mm, for increased flexibility. It has a thin guide plate (0.5mm) for access into narrow gaps ensuring full versatility. The flat base ensures constant contact for a consistent...

Trend TREFFP2NR10 FFP2 NR Fold Flat Mask (Pack 10)

Trend FFP2 NR Fold Flat Mask with HEPAC filtration for protection against fine, nuisance dust particles, such as softwood dust, sheet materials, (not MDF or hardwood) and fibreglass. With efficiency above 94% for increased respiratory protection. The entire surface area of the mask is the filter making it highly efficient whilst also making breathing easier. It provides day-long protection, up to 8 hours. Elasticated, adjustable...

Trend TREFFS120 Folding Flush Cut Saw 120mm (4.3/4in) 22 TPI

This Trend Folding Pocket Flush Saw is suitable for cutting dowels, plugs and dovetails.Manufactured in Japan, the non-set teeth can cut right at the surface without marking the surface, which makes it ideal for dowel trimming and dovetail joint trimming. The blade is 0.4mm thick, which allows flexibility to allow cutting flush with the surface. The 120mm blade has a fine polished finish with 22...

Trend TREFTSCASE Case For FAST TRACK Sharpener

The Trend Case for Fast Track Sharpener is a heavy-duty fabric which will hold the Trend Fast Track and accessory diamond stones. For use with FTS/KIT and FTS/KIT/MK2. It has pockets to accept three accessory stones, and a hook and loop flap to keep contents secure.It features a hanging loop/ carry strap and keeps the accessories, including cleaning block and non-slip mat, together with the...

Trend TREFTSMK2 FAST TRACK™ MK2 Sharpener

Trend FAST TRACK™ MK2 Sharpener for consistent edges on chisels and plane irons. With 4 honing angles for increased honing and edge reshaping options. Consistent sharpening angle promotes tool life and creates a perfect square edge with a flat ground finish. Laterally sharpened edges are more durable and less prone to fracturing. Magnetic stone holders keep each stone securely in place for safe, easy operation....

Trend TREFTSSP FAST TRACK Replacement Stone

Trend FAST TRACK Replacement Stones are made from monocrystalline diamond with a unique diamond cross relief pattern for optimal abrasion rates. This helps to maximise sharpening efficiency and reduce clogging. Diamonds are held by nickel plating to a steel substrate, with ABS plastic base.

Trend TREGAUGED60 GAUGE/D60 Digital Depth Gauge

Trend GAUGE/D60 Digital depth gauge for router tables and saw benches. Horizontal and vertical measuring, ideal for hand routers, router tables and saw benches. It has an LCD readout for mm, imperial and fractions with auto shut off 5 mins. The removable pin allows hole depths to be measured. The pin can be parked on arm. Hole depth 50.8mm (2 inch).

Trend TREGB12 Guide Bush

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.

Trend TREGB5 GB5 Sub Base C/W Bush & 2 Pins

Round sub base can be used as a guide itself.Supplied with:-10 mm guide bush, 1/4in and 1/2in shank line up pin and bush and fixing screws.Will fit:- DEWALT DW620, 621, 624, 625EK, 629, Elu OF97(E), MOF131, 177(E), Bosch GOF1600A 1700ACE and Makita RP0910, 0111C and B & Q CLM2050R, 1250R, 11/03.