Trend TREC056A12TC C056A x 1/2 TCT Radius Cove Cutter 9.5mm Radius

Trend TCT Radius Cove Cutter with two flutes and carbide TCT tips for a cleaner cut and fast clearance of waste in all timber and timber-based materials. Its PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. Fitted with a 1/2in shank, 'K' marked to ensure safe working practices.  Ideal for classic decorative mouldings and edge details. Specification: Radius: 9.5mmCutting Depth:...

Trend TREC07814TC CraftPro Round Over Two Flute Cutter, 1/4in Shank

The Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curved edges. With two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. A PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller...

Trend TREC11614TC 90° Bearing Guided Trimmer Cutter

Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TCT.

Trend TREC12114TC Bearing Guided Template Profile Cutter

Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive...

Trend TREC14014TC Bearing Guided Corner Bead, 1/4in Shank

Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90°. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating...

Trend TREC14514TC C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm

This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with...

Trend TREC15212TC Biscuit Jointer Set, Craft Pro

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm...

Trend TREC1533 C153/3 Kitchen Worktop Cutter (3 Pack)

The Trend C153/3 CraftPro Kitchen Worktop Cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for kitchen fitting, 50mm cutting length for worktops up to 40mm thick. With a 'K' marked shank for correct insertion depth, providing safer routing. It has premium Tungsten Carbide cutting edges, ideal for use in solid timber and abrasive chipboard core...

Trend TREC16814TC C168 x 1/4TC Guided Trimmer 6.35 x 25.4mm

The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to follow more intricate curves. 25.4mm cutting depth for replication of thin components with templates. Fitted with a bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. PTFE coating to minimise heat and...

Trend TREC17212TC CraftPro Two Flute Cutters, 1/2in Shank

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads, ideal for router table work and for use in bigger routers. The 'K' mark shank ensures safe...

Trend TREC20914TC Bearing Guided Intumescent Strip Cutter

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion...

Trend TREC21412TC Bearing Guided 3° Undercut Router Bit

The Trend CraftPro Bearing Guided 3° Undercut Router Bit has a shank-mounted bearing guide for routing a leading edge on doors to allow a tight fit against the jamb. Specification: Cut Depth: 50mmOverall Length: 100mmShank: 1/2in

Trend TRECASE1001 CASE/1001 Combi 1001 Carry Case

Hard-wearing carry case for protecting and carrying the Trend COMBI1001, COMBI1002, KWJ700 and KWJ900.

Trend TRECB38532TC CB38-532 TCT CB Counterbore

The Trend CB Counterbore is extensively used for recessing bolt and screw heads and is supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive).To be used at drilling speeds only, they are not suitable for ferrous and non-ferrous metals. When setting up, ensure the flutes of the...

Trend TRECCHISEL Corner Chisel

The Trend Corner Chisel is used to square up rounded corners on hinge and lock recesses. Fitted with a high-speed steel (HSS) anvil. Use with a Hammer. The chisel can be resharpened. Ideal for use with hinge and lock jigs.