Trend TREDLIFTA Door Lifter A

This Trend foot operated Tredlifta Lifter A is used to support the door while fitting into the door frame, it is foot operated freeing up the users’ hands. It slides under the door, stays flat and stable until ready to activate the lift with the user’s foot.It will lift 38mm high and hold a maximum weight of 108kg.Made from plastic and non-marring, they have a...

Trend TREDWSLF100 DWS/LF/100 Lapping Fluid 100ml

Trend's Lapping Fluid is designed solely for use in the engineering industry and is suitable with all quality diamond abrasive products. Use this instead of water to reduce the threat of rusting by 95%. It reduces the possibility of clogging, excessive build-up of residue and improves diamond performance.It has penetrating qualities and oil/water solubility, which not only increases the cutting action but also assures superior...

Trend TRECRB6FC CraftPro Bench Sharpening Stone

The Trend CR/DWS/B6/FC is a 6 inch x 2.3/8 inch double sided diamond bench stone with monocrystalline diamonds for fast, clean, stock removal which offers excellent sharpening performance. It is double sided for coarse sharpening and fine honing. Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal for carpentry as it rapidly fixes or restores a damaged...

Trend TRECCHISEL Corner Chisel

The Trend Corner Chisel is used to square up rounded corners on hinge and lock recesses. Fitted with a high-speed steel (HSS) anvil. Use with a Hammer. The chisel can be resharpened. Ideal for use with hinge and lock jigs.

Trend TREC21412TC Bearing Guided 3° Undercut Router Bit

The Trend CraftPro Bearing Guided 3° Undercut Router Bit has a shank-mounted bearing guide for routing a leading edge on doors to allow a tight fit against the jamb. Specification: Cut Depth: 50mmOverall Length: 100mmShank: 1/2in

Trend TRECRKFP5 CR/KFP/5 Kitchen Fitters Set, 5 Piece

The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters. The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops. With a carbide centre tip profile, the cutter is...

Trend TREDEAL10 Kitchen Worktop Cutter Display of 10

Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter.TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Advanced automated grinding improves the carbides resistance to wear.Up to 200% longer life when cutting abrasive materials.Cleaner cut than other existing carbides.Final results & life that makes it the most cost effective carbide today. Includes 10 x 383DX12TC Cutters in...

Trend TREDAF8 Digital Angle Finder 200mm (8in)

The Trend DAF/8 Digital Angle Finder has a large LCD display with digital readout to allow easy reading of angles. It calculates angles from 0-220° and up to 360° when the locking knob is removed. Ideal for measuring internal and external angles quickly. The angle finder has a large aluminium stock for stability and accuracy and a robust yet lightweight aluminium construction butt. The 50mm...

Trend TRECSB216P3 CraftPro Mitre Saw Blade 216 x 30mm x 24T/48T/60T (Pack 3)

This Trend CraftPro Mitre Saw Blade Triple Pack contains a selection of same diameter Tungsten Carbide Tipped circular saw blades designed for a professional finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. The high-grade, alloy steel plate body has been precision ground to maintain flatness. Silver brazed to ensure tips are securely bonded to body. With a reamed bore...

Trend TREDCLAMP Door Clamp 55mm Capacity (Ratchet Type) D/CLAMP/A

Holds door while drilling and fitting locks. No set-up time needed. No more searching and alternative door stops. Padded to prevent door and floor damage. For doors up to 55 mm thick. Patent No. PCT/EP2006/006072.

Trend TRECSB250P3 CraftPro Table Saw Blade 250 x 30mm x 48T/60T/84T (Pack 3)

This Trend CraftPro Table Saw Blade Triple Pack contains a selection of same diameter Tungsten Carbide Tipped circular saw blades, designed for a professional finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. High-grade alloy steel plate body precision ground to maintain flatness. Silver brazed to ensure tips are securely bonded to body. With a reamed bore to ensure a...

Trend TRECSB190P3 CraftPro Saw Blade 190 x 30mm x 24T/40T/60T (Pack 3)

This Trend CraftPro Saw Blade Triple Pack contains a range of same diameter saw blades, designed for a professional finish in softwood, hardwood, plasterboard, stone fibreboard, particle board, veneer, plywood, MDF and hardboard. Microgranular Tungsten Carbide tipped to allow for cutting of abrasive materials. Silver brazed to ensure tips are securely bonded to body. With a reamed bore to ensure a precise spindle fit. Laser...

Trend TREC04914TC C049 x 1/4 TCT Bearing Guided Chamfer Cutter 45° 12.7 x 32mm

The Trend CraftPro Bearing Guided Chamfer Cutter for edging and chamfer cutting, on man-made fibreboards, natural timbers and plastics. It has two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Follows straight and curved profiles for crisp, professional detailing work on an edge. The PTFE coating minimises heat and resin build-up for increased cutter...

Trend TREC1533 C153/3 Kitchen Worktop Cutter (3 Pack)

The Trend C153/3 CraftPro Kitchen Worktop Cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for kitchen fitting, 50mm cutting length for worktops up to 40mm thick. With a 'K' marked shank for correct insertion depth, providing safer routing. It has premium Tungsten Carbide cutting edges, ideal for use in solid timber and abrasive chipboard core...

Trend TREC16814TC C168 x 1/4TC Guided Trimmer 6.35 x 25.4mm

The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to follow more intricate curves. 25.4mm cutting depth for replication of thin components with templates. Fitted with a bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. PTFE coating to minimise heat and...