Trollull TRO772015 Handy Rolls Fine Steel Wool (Pack 6)

Introducing the Trollull TRO772015 Handy Rolls Fine Steel Wool (Pack 6), the perfect solution for all your cleaning and polishing needs. Designed with precision, these extra small and economical abrasive rolls are ideal for restoring the shine to brass and copper. Whether you're sprucing up vases, decorative pots, saucepans, or ashtrays, these handy rolls are your go-to choice for a variety of surfaces. Each pack...

Trollull TRO606492 Stove Glass Cleaner (Pack 2)

Trollull Stove Glass Cleaner Pads have a working side with a double layer of extra-fine steel wool. For fast, scratch-free cleaning without the use of cleaning agents. Suitable for all stove glass.Pack of 2.

Trend TRETR2914TC TR29 x 1/4 TCT Shank Mounted Bearing Guided Profiler 12.7 x 25.4mm

Discover the Trend TRETR2914TC TR29 x 1/4" TCT Shank Mounted Bearing Guided Profiler, a precision tool designed for superior trimming and profiling on timber and man-made boards. With an extra-long shank for enhanced reach and control, this profiler delivers clean, consistent edge finishes even in challenging setups. Key features 1/4" TCT shank mounted profiler for secure, dependable performance. Bearing-guided TR29 profile ensures stable cuts and...

Trend TRET420358TC T420/35 x 8mm TCT Hinge Sinking 35mm Diameter

Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm.Shank. 8mm.

Trollull TRO725702 Stainless Steel Wool Pads (Pack 2)

Trollull Stainless Steel Wool Pads have been specially developed to work on humid surfaces or in combination with chemical products. Ideal for the surface treatment of wood containing tannic acid (e.g. oak, walnut, mahogany).

Trend TRET4213514T T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in

Trend TRESNAPHKLC6 SNAP/HKLC/6 Keyless Chuck

Upgrade your drilling setup with the Trend SNAP/HKLC/6 Keyless Chuck, engineered for quick chucks and impact drivers. This precision chuck securely holds parallel shank drill bits up to 1/4 inch, delivering reliable performance when you need it most. Clamping capacity: 0.8 mm (1/32 inch) to 6 mm (1/4 inch) Enhanced gripping power: stronger grip than traditional key-type drill chucks Lightweight design: plastic body reduces weight...

Trend TRESETSS3512 SET/SS35X1/2TC TCT Router Cutter Set, 35 Piece

The Trend SET/SS35X1/2TC TCT Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in aluminium carry case. Contains: 1 x Single Flute Cutter 3.2 x 12.7mm 5 x Straight Cutters: 6.3 x 19mm, 9.5 x 25mm, 12.7 x 19mm, 12.7 x 25mm and 19 x 19mm 1 x...

Trend TRESNAPMAG SNAP/MAG Magnetic Holder for Screws

Magnetic screwdriver holder. Designed to hold longer screws securely on to the screwdriver bit, with an extra magnetic ring. Accepts 25 mm insert bits and has an adjustable barrel.Supplied with one No 2 pozi bit.

Trend TRESETSS8TC SS8TC 1/4in TCT Router Bit Starter Set, 12 Piece

Trend 12 Piece Router Bit Starter Set contains a range of the most widely used cutters for decorative woodworking. Made from tungsten carbide with 1/4in shanks and supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 19mm.1 x Dovetail: 104° x 1/2in.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Chamfer: 45°.1 x Guided Rebater: 9.5mm.1 x...

Trend TRESETSS3114 SET/SS31X1/4TC TCT Router Cutter Set, 30 Piece

The Trend SET/SS31X1/4TC Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in an aluminium carry case. Contains: 9 x Non-bearing Straight Cutters: 5 x 12mm, 6 x 20mm, 8 x 20mm, 10 x 20mm, 12 x 20mm, 14 x 20mm, 16 x 20mm, 18 x 20mm and...

Trend TRESETSS9TC SET/SS9TC 1/2in TCT Router Bit Starter Set, 15 Piece

Enhance your woodworking with the Trend TRESETSS9TC SET/SS9TC 1/2in TCT Router Bit Starter Set — a meticulously curated 15-piece collection built for long-lasting performance and precise results. Designed for versatility, these tungsten carbide tipped cutters handle softwood, hardwood, chipboard, plywood and MDF with ease, delivering clean edges and smooth finishes across a wide range of routing tasks. Presented in a durable plastic carry case for...

Trend TRESNAPHDSET SNAP/HD/Set Drill Set, 7 Piece

The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in the sets to enable drills to be removed with two spanners.7 piece drill set.1.5, 2, 2.5, 3, 4, 5 and 6mm.Supplied in a storage tube.

Trend TRESET6PC14 1/4in TCT Router Cutter Set, 6 Piece

Elevate your decorative woodworking with the Trend TRESET6PC14 1/4in TCT Router Cutter Set, a versatile 6-piece collection engineered for precise, durable cuts. Each cutter is tungsten carbide tipped (TCT) to deliver long life and consistently sharp finishes across a range of materials. This 1/4in router cutter set is suitable for softwood, hardwood, chipboard, plywood and MDF, making it ideal for creating decorative profiles, grooves, edges...

Trend TRERT35 RT/3.5 TORX Replacement Screws

The Trend Rota – Tip Replacement Screws are tapered head replacement screws for Trend Rota- Tip router cutters. They are high quality replacement screws providing the correct fixings to secure the Rota-Tip blades for maximum performance.The Torx head fitting ensure secure tightening pressure when fitting blades, the 6mm tapered head provide correct clamping pressure to the blades for safe operation and ensures the Rota-Tip cutters...