ForgeFix FORFFP1000Y ForgeFast Pozi Compatible Elite Performance Wood Screw Organiser 1000 Piece

ForgeFix 1000 piece ForgeFast Elite Performance Wood Screw Organiser. Pozi compatible head, anti-friction thread to reduce splitting, double cutting point for fast drive, improved countersinking from 6 angled lobes and Elementech 400 corrosion-resistant coating. 150 x ForgeFast Pozi Compatible Wood Screws 3.5 x 16mm100 x ForgeFast Pozi Compatible Wood Screws 3.5 x 25mm180 x ForgeFast Pozi Compatible Wood Screws 3.5 x 30mm130 x ForgeFast Pozi...

ForgeFix FORFFFS4255Y ForgeFast TORX® Compatible Flooring MDF Chipboard Screw 4.2 x 55mm Box 200

The ForgeFast Elite Performance MDF & Chipboard Flooring Screw is specifically designed for fixing flooring grade boards to timber structures. The double cutting point breaks through the hard, dense surface of flooring grade materials. The anti-split, fast start thread can then engage quickly to form a rapid pick-up at the start of insertion. Reduced drive torque and no pre-drilling mean quick installations, whilst the fix...

ForgeFix FORDWSWH13 Drywall Screw Wafer Head TFT ZP 4.2 x 13mm Bulk 1000

The Forgefix Phillips fine thread, wafer head Drywall Screws are zinc plated for increased durability. They come complete with a Phillips No.2 insert bit.The screws have a self drilling hardened point designed for fitting dry linings to steel framework without drilling pilot holes. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and...

ForgeFix FORCRSCM Corrugated Roofing Screw Round Head Pozi ZP 5mm x 50mm Bag 10

These Forgefix Pozidriv, round head Corrugated Roofing Screws are Zinc plated for increased corrosion resistance. They come complete with a specially designed plastic fold over cap to suit installation of corrugated roofing. The plastic cap has a large surface area to improve weather resistance. Screw size: 5.0 x 50mm (Pozi). APPLICATIONSuitable for fixing corrugated sheeting to timber sub frames. Zinc coatings prevent oxidation of the...

ForgeFix FORTFW1663 TechFast Bonded EPDM Washers

Forgefix TechFast Bonded EPDM Washers provide a watertight seal. They offer protection against the weather, especially where moisture and condensation are a factor. The washer seals the hole created in the material being fixed and reduces the chance of corrosion.

ForgeFix FORTFMC48101 TechFast Masonry Screw, TX Compatible, CSK

The ForgeFix TechFast Masonry CSK Screw is a self-tapping, no stress alternative to plastic plugs. With an easy 2-step installation: drill a hole in substrate and screw in with power tool. These screws have a countersunk head with TORX® compatible recess. Protected by an Elementech coating, fire and corrosion resistant. Salt spray tested to 1,000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied...

ForgeFix FORTFHWD6322 TechFast Self-Drill Stitching Screws, Hex

Forgefix TechFast Self-Drilling Stitching Hex Screws are used to join metal roofing sheet panels together. They are self-drilling up to 2.5mm. The smaller No.1 drill tip can drill through 2 sheets then engage the threads to clamp the sheets together under the head. They have an 8mm Hex head. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested...

ForgeFix FORTFHW5580L TechFast Screws, Composite Panels to Steel, No.3 Tip

Forgefix TechFast Composite Panels to Steel Hex Screws with 16mm EPDM washers, are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are...

ForgeFix FORTFH55105H TechFast Screws, Composite Panels to Steel, No.5 Tip

Forgefix TechFast Composite Panels to Steel Hex Screws with 19mm EPDM washers, are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are...

ForgeFix FORTFH5525L TechFast Roofing Sheet to Steel, No.3 Tip

Forgefix TechFast Roofing Sheet to Steel Hex Light Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied without washer.

ForgeFix FORTFH5570H TechFast Roofing Sheet to Steel, No.5 Tip

Forgefix TechFast Roofing Sheet to Steel Hex Heavy-Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied without washer.

ForgeFix FORTFHD5560L TechFast Screws, Composite Panels to Steel, No.3 Tip

Forgefix TechFast Composite Panels to Steel Hex Screws with 19mm EPDM washers, are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are...

ForgeFix FORSTP144Z Self-Tapping Screws, Pozi, Pan Head, ZP

These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many...

ForgeFix FORSS3525NPM Socket Screws, Slotted, RSH, NP

These Forgefix Socket Screws have a raised head, and are designed for attaching electrical wall sockets and switches. The screws have a slotted head and are nickel plated for increased durability. APPLICATIONUsed specifically for attaching electrical wall socket and switches to back plates. The Nickel plating process coats mild steel or stainless steel to considerably prolong the part’s life. Nickel plating is probably the most...

ForgeFix FORSCW6N Screw Cup Washers, Nickel Plated

These Forgefix Screw Cup Washers are made from solid brass with a nickel plated finish to avoid corrosion. They are quick and easy to install, with no need to countersink screws. APPLICATIONTo enable flush finish in numerous joinery installations.Can be used with most screw types. The Nickel plating process provides a coating to considerably prolong the part’s life. Nickel plating is probably the most corrosion...