Faithfull FAIKNEELER Garden Kneeler

Make gardening that bit easier with this useful garden kneeler, stool and storage box in one. Kneel in cushioned comfort or turn it over to sit at the correct height for many gardening chores. Manufactured from a heavy-duty, impact resistant plastic frame, with an inset rubber seat and integral foam kneeler. The stool's cleverly designed legs have integrated hand grips, that serve as supporting arms...

Faithfull FAIKLINO LINO KNIFE 75MM 3IN BEECH

The lino knife is used for cutting soft materials such as linoleum. The strong curved blade is riveted to a beechwood handle. FSC-certified wood is used in the manufacture of this product. Wood products with FSC certification undergo a rigorous set of environmental, social, and economic requirements in order to be considered sustainable and responsibly sourced.Specification:Blade length: 75mm (3in)

Faithfull FAIKERBL Heavy-Duty Kerb Lifter

The Faithfull Heavy-Duty Kerb Lifter has a fully galvanised, rust-resistant metal construction with rubber handles and kerb grips. Designed for two-person operation for lifting and laying kerbs, edging stones and paving slabs. The quick operation clamp allows fast and accurate movement of heavy items without stress on the back and knees. Ideal for ground workers and general builders. Specification: Rubber Grip Length: 100mmClamping Range: 360mmLoad...

Faithfull FAIKAGSC75 Kango Shank Straight Scaling Chisel 75 x 300mm

Faithfull Scaling Chisel Straight Steels are produced to provide high-performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Scaling Chisel.Length: 300mm. Width: 75mm.Fitting: 21mm Hex shank, Kango (900/950K).

Faithfull FAIKAGP450 Kango Shank Point 450mm (914113)

Faithfull Point Steels are produced to provide high-performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Point.Length: 450mm.Fitting: 21mm Hex shank, Kango (900/950K).

Faithfull FAIKAGP380 Kango Shank Point 380mm (914112)

Faithfull Point Steels are produced to provide high-performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills, such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Point.Length: 380mm.Fitting: 21mm Hex shank, Kango (900/950K).

Faithfull FAIKAGC450 Kango Shank Chisel 25 x 450mm (914119)

Faithfull Chisel Steels are produced to provide high-performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Chisel.Length: 450mm. Width: 25mm.Fitting: 21mm Hex shank, Kango (900/950K).

Faithfull FAIKAGC380 Kango Shank Chisel 380mm (914118)

Faithfull Chisel Steels are produced to provide high-performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Chisel. Length: 380mm. Width: 25mm.Fitting: 21mm Hex shank, Kango (900/950K).

Faithfull FAIJH Junior Hacksaw 150mm (6in)

The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured. Replacement blades available. Blade Length: 150mm (6in)

Faithfull FAIJBT76D Jigsaw Blade Diamond Grit 76mm

The Faithfull Diamond Grit Jigsaw Blade is designed for tough cutting situations. The tough braze bonded diamond edge and high-grade steel blade blank give an extremely long lifespan. The blade is extremely robust with minimal diamond loss or dulling. It also features patented Reduced Kerf Technology (RKT) for fast cutting. It will easily cut through Cast Iron, Plasterboard, Cement Board, Fibreglass, Carbon Fibre, Composites, Ceramic,...

Faithfull FAIJBT318A Metal Cutting Jigsaw Blades Pack of 5 T318A

These Faithfull Straight Metal Cutting Jigsaw Blades T318A are for use with thin materials and are ideal for non-ferrous metals, luminous metals, and material with fillings. Specifications: Type: High Speed Steel ('T' Shaft).Cutting length: 110mm.TPI. 21.Pack Quantity: 5.  

Faithfull FAIJBT127D Metal Cutting Jigsaw Blades Pack of 5 T127D

The Faithfull Straight Metal Jigsaw Cutting Blade for thin materials is ideal for non-ferrous metals, luminous metals, and glass fibre reinforced plastics.The cutting applications include:  Plastics, Non-Ferrous Metals, Aluminium and Fibreglass. Specifications: Type: High Speed Steel ('T' Shaft).Cutting length: 75mm.TPI. 8.Pack Qty: 5.    

Faithfull FAIJBT118G Metal Cutting Jigsaw Blades Pack of 5 T118G

The Faithfull Straight cutting jigsaw blade is ideal for very thin sheet metals, non-ferrous metals, and aluminium.The cutting applications include:  Non-Ferrous Metals, Sheet Metal and Aluminium.   Specifications: Type: High Speed Steel ('T' Shaft).Cutting length: 50mm.TPI: 35.Pack Qty: 5.  

Faithfull FAIJBT118B Metal Cutting Jigsaw Blades Pack of 5 T118B

The Faithfull Straight Metal Cutting Jigsaw Blade are built for thick materials, ideal for thick sheet metals, non-ferrous metals, and aluminium.The T118B come in a pack of 5 and their cutting applications include: Non-Ferrous Metals, Sheet Metal and Aluminium.Specifications: Type: High Speed Steel ('T' Shaft).Cutting length: 50mm.TPI: 12.Pack Quantity: 5.

Faithfull FAIJBT118A 8009-HSS Metal Cutting Jigsaw Blades Pack of 5 T118A

The Faithfull straight Metal Cutting Jigsaw Blade, for thin materials, is ideal for thin sheet metals, non-ferrous metals, and aluminium.The 8009-HSS, coming in a pack of 5, the T118A is made of a good quality, for applications which  include:  Non-Ferrous Metals, Sheet Metal and Aluminium. Specifications: Type: High Speed Steel ('T' Shaft).Cutting length: 50mm.TPI: 21.Pack Qty: 5.