Jubilee® JUBCD100FL3 Clip Dispenser (100) + 3 Flex Drivers

These Original Range Jubilee® Clips in zinc protected mild steel are the most popular clips in Jubilee's range. They are ideally suited for most day-to-day requirements for joining hoses in areas such as the automotive industry and automotive aftermarket.Also used for agricultural applications such as irrigation and farm machinery, pneumatic and hydraulic applications in the industrial sector, hardware/DIY applications and also in construction.The Jubilee Clip...

Jeyes JEY570280 Drain Cleaner 1 litre

Jeyes Drain Unblocker eliminates the toughest blockages including fully blocked drains. It has a powerful, thick clinging formula that works in 30 minutes. Dissolves grease, hair, soap scum, food and decaying leaves whilst cleaning and deodorising outdoor drains.

IRWIN® Jack® JAKTXP21BOW Xpert Bowsaw 533mm (21in)

The IRWIN Jack Xpert Bowsaw features precision filed and hardened teeth that cut on the pull and push stroke. Manufactured with high-frequency welded steel tubing to maintain blade tension. The extra-strong latches ensure optimal blade tension and hand protection while working. Suitable for cutting green and dry wood.

IRWIN® Jack® JAKEVOCTD Evo Universal Coated Saw 485mm 10 TPI

The IRWIN Jack Evo Universal Coated Saw has a PTFE coating for increased speed when sawing and improved wear resistance. Its optimised tooth design and set allows for maximum versatility, speed and quality of cut. The hard point teeth stay sharp, 6-8 times longer than non-hardened teeth. Made from high quality C75 steel for maximum stability and power transfer. An angled nose increases blade stability....

IRWIN® Jack® JAK990UHPTB 990UHP Fine Junior / Toolbox Handsaw Soft-Grip 335mm (13in) 12 TPI

IRWIN Jack 990UHP Junior / Toolbox Saw with soft-grip for user comfort. The fine toothing gives a superior finish. Ideal for cutting plywood, chipboard and other man-made materials. Blade Length: 335mm (13in)Teeth: 12 TPI

IRWIN® Jack® JAK990UHP550 990UHP Fine Handsaw Soft Grip 550mm (22in) 11/12 TPI

IRWIN® Jack Fine Handsaw with a soft grip for user comfort. The fine toothing gives a superior finish. Ideal for cutting plywood, chipboard and other man-made materials. Specification: Blade Length: 550mm (22in).Teeth: 11/12 TPI.

IRWIN® Jack® JAK880TUN14 880UN Universal Toolbox Saw 350mm (14in) 8 TPI

The IRWIN Jack 880UN Universal Toolbox Saw has all the features and benefits of a standard Jack 880, with the convenience of a 14in 'short' blade. The saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer...

IRWIN® Jack® JAK880BUN22 880 UN Universal Hand Saw 550mm (22in) Coated 8 TPI

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade has a PTFE coating to reduce friction. The handle is a proven design, light and strong with an ultra sonic welded soft grip for increased hold...

IRWIN® Jack® JAK770UHP550 770UHP Coarse Hardpoint Handsaw Soft Grip 550mm (22in) 7 TPI

IRWIN Jack Hardpoint fleam toothed crosscut handsaw with soft grip for user comfort. The ideal jobbing builders saw. The Jack Irwin JAK770UHP550 770UHP-550 Hardpoint Soft Grip Handsaw comes with the following specifications:Blade Length: 550mm (22 inch).Teeth: 7 TPI

IRWIN® Jack® JAK10505548 Xpert Pro Light Concrete Saw 700mm (28in) 2 TPI

IRWIN Jack Xpert Pro Light Concrete Saw with specially designed large teeth for cutting cellular concrete. The 1mm thick high quality steel blade ensures maximum stability and power transfer. Xpert soft-grip handle provides a positive, lightweight but durable grip, even during prolonged use. 45° and 90° angles on the handle which are useful for marking.Length 700mm (28 in)Hardpoint Teeth 2 tpi

IRWIN® Jack® JAK10505542 Xpert Coarse Handsaw 550mm (22in) 8 TPI

IRWIN Jack coarse tooth handsaw ideally suited for laminated boards, plasterboard and fast ripping cuts.The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8 TPI for ultimate cutting performance. Deep gullets positioned along the cutting edge further enhance the cutting performance through greater volume removal of waste material.The soft grip handle with finger guide is...

IRWIN® Jack® JAK10503533 Xpert Floorboard/Veneer Saw 325mm (13in) 12 TPI

IRWIN Jack shallow bladed, round nosed saw for cross cutting, mitre work, PVC, floorboards and similar items. Soft-grip handle with finger guide for maximum comfort in prolonged use. Screwed handle/blade assembly for added safety.Length 330mm (13 in)Teeth: 12 tpi.

ITL Insulated ITL03100 Insulated Socket Set of 12 1/2in Drive

These ITL12 Piece ½ Inch Drive Socket Set's are fully insulated and exceeds international standards. They have a lifetime guarantee on the tool and insulation, and are supplied in a case.This set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant.ITL tools are 100% tested...

ITL Insulated ITL02150 Insulated Screwdriver Set, 5 Piece

ITL Insulated Screwdrivers with an injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. ITL insulated tools are the toughest in the market, being virtually indestructible. These...

ITL Insulated ITL02100 Insulated Screwdriver Set, 7 Piece

ITL Insulated Screwdrivers with an injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. ITL insulated tools are the toughest in the market, being virtually indestructible. These...