Roughneck ROU11001 Gorilla V-Series Framing Hammer 454g (16oz)

The Roughneck® GORILLA® V-Series Framing Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The...

Roughneck ROU10150 Wire Stripping Pliers 160mm

The Roughneck Wire Stripping Pliers are made from high-quality steel, that has been drop-forged, hardened and tempered. In addition, the cutting edge is induction hardened for added durability. They have finely polished heads with a clear lacquer coating that helps prevent rust. Fully encased spring-loaded mechanism. The pliers are fitted with comfortable double injected, air-cushion grips that help to reduce fatigue during use. The handles...

Rohm ROH600581 HBF Hammer Chuck 13mm SDS

This Rohm 13mm SDS Hammer chuck with a rugged construction ensures extended service under the most demanding concrete drilling operations. The unique Hammerlock mechanism provides full gripping pressure and prevents drill slippage during hammer drilling.

Rohm ROH58433 Adaptor 3/8 x 24 Male

This Rohm adaptor fits a female chuck and a female powertool. 3/8 x 24 mount.

Rohm ROH547600 SDS Plus Adaptor 1/2 x 20

This SDS chuck adaptor fits an SDS powertool. Supplied with left-hand thread retaining screw. 1/2 x 20 mount.

Rohm ROH1261217 EXTRA-RV 40 10mm 2 Sleeve Plastic Keyless Chuck Mount 3/8 x 24

The Rohm EXTRA-RV 40 Plastic Keyless Chucks are for corded and cordless drills, with or without a spindle stop, up to a maximum torque of 60Nm and up to 650 Watt. These impact-resistant, quick-action drill chucks have a radial locking plastic sleeve. With a through-hole for use with a locking screw. The Rohm 1261217 EXTRA-RV 40 Plastic Keyless Chuck has a radial locking plastic design...

ROCOL ROC72021 MOULD RELEASE Spray 400ml

ROCOL MOULD RELEASE Spray is a high performance PTFE based release agent. Designed to give fast, efficient and clean release with faithful reproduction of the mould profile however complex the mould or minute the detail. Suitable for use on all plastic and rubber mould tools including injection, compression and blow mouldings. Enabling high speed production. MOULD RELEASE Spray offers excellent adhesion, is non-staining, will not...

ROCOL ROC72015 PR Spray 400ml

ROCOL PR Spray is designed to give fast, efficient clean release in critical moulding applications. It penetrates and spreads to all parts of the most intricate mould to give full, clean release, with improved gloss finish. PR Spray gives a fine, controlled spray with complete coverage for maximum economy. Use on all types of blow, injection, flow and compression moulding, particularly on complex tooling. Helps...

ROCOL ROC69523 GALVA BRIGHT Spray 500ml

ROCOL GALVA BRIGHT Spray provides excellent long term corrosion protection for metal components requiring a permanent bright coating. Zero corrosion after 2,000 hours salt spray testing. It is a high performance coating or primer which contains pure zinc, aluminium, synthetic resins and additives. Excellent for repairing galvanised surfaces, with a non-toxic formulation. Suitable for use as a primer and can be over-painted. Temperature Range: -30ºC...

ROCOL ROC69522 GALVA FLASH Spray 500ml

ROCOL GALVA FLASH provides long term corrosion protection for metal components that require a permanent bright, glossy appearance with the lustre look of aluminium. Zero corrosion after 1,000 hours salt and spray testing. It forms a high performance coating that contains pure zinc, aluminium, synthetic resins and additives. Its unique combination of flexibility and hardness is resistant to peeling, flaking and fading. Suitable for use...

ROCOL ROC69515 COLD GALVANISING Spray 400ml

ROCOL COLD GALVANISING Spray provides ultra long term corrosion protection for metal components requiring a permanent zinc-rich mid-grey coating. Ideal for components that cannot be galvanised using a hot dip process. It can also be used to repair the surface of galvanised components which have been damaged or scratched. Offers rapid drying and provides a smooth coating that will not crack or split even when...

ROCOL ROC63181 FLAWFINDER System Kit

ROCOL FLAWFINDER is a non-destructive inspection system that is designed to provide a fast, reliable method for visual detection of cracks or flaws, which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings, etc. Comprising 1 each of the following: 1 FLAWFINDER Cleaner Spray (300ml).1 FLAWFINDER Developer Spray (400ml).1 FLAWFINDER Dye Penetrant (300ml).

ROCOL ROC53041 RTD® Foamcut Spray 300ml

ROCOL RTD® Foamcut is a metal cutting lubricant specially formulated to provide extreme pressure cutting performance in an economical to use foaming aerosol. With a low odour. Its foaming action adheres to the tool, allowing it to be applied directly to moving tools. Suitable for severe cutting operations.

ROCOL ROC53011 RTD® Spray 400ml

Rocol RTD® Spray is an aerosol applied metal cutting lubricant consisting of a concentrate of extreme pressure additives. It is suitable for all metals including hardened steels, titaniums and nimonics, in even the most severe cutting operations. It contains technically advanced extreme pressure additives which significantly reduce friction at the cutting edge, giving superb performance. As a result RTD extends tool life and promotes superior...

ROCOL ROC52086 ULTRAGLIDE X5 Lubricant 5 litre

ROCOL ULTRAGLIDE X5 is a total protection slideway lubricant which is resistant to water wash off and protects slides from corrosion. With rapid demulsification, separates rapidly from cutting fluid and is easily removed by oil skimmers/separators. It also has great lubricant and load carrying properties, reduces wear and prevents stick slip.