STANLEY® STA166930 FatMax® Wrecking Knife 25mm

The Stanley FatMax® Wrecking Knife has a 4mm, double-edged blade, that is ideal for demolishing, leveraging and splitting. Fitted with a rubber coated ergonomic grip for greater safety and leverage. The striking cap allows the knife to be hit with a hammer, speeding up work progress. Blade Width: 25mm

STANLEY® STA158501 FatMax® Interchangeable Nail Set

The Stanley FatMax® Interchangeable Nail Set has an interchangeable system that accepts conventional bits. Fitted with a bi-material, cushion grip for increased comfort and reduced slipping. Specification Nail Sizes: 1/32, 2/32in.

STANLEY® STA156001 AntiVibe Lump / Club Hammer 1.3kg (3 lb)

This lump/club hammer has been designed with a one-piece forged construction for strength and durability. The patented anti-vibe technology reduces vibration transmitted to wrist and elbow. Ideal for use in confined work areas with little room for a full arc-swing. The wide face makes it ideal for striking chisels and punches.Weight: 1360g (3 lb).

STANLEY® STA155525 Super Wonder Bar® Pry Bar 380mm (15in)

The Stanley Tools Super Wonder Bar® Pry Bar is made from forged, high-carbon steel for added strength and durability. Polished, bevelled cutting edges with a high-visibility, powder-coated finish. It has an arched centre for swing during nail pulling, no need for an additional wood block. The extended tongue provides added grip and access for hard-to-reach places. Tight radius on bend angle aids in positioning bar....

STANLEY® STA155009 FatMax® Spring Steel Moulding Bar 250mm (10in)

This Stanley FatMax® Moulding Bar is manufactured from spring steel for durability with a high visibility powder coated finish and polished tips. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim reducing material damage. The non-slip grip provides increased leverage.

STANLEY® STA154077 CP3.1/2 Pin Hammer 100g (3.1/2oz)

This Stanley CP3.1/2 Pin Hammer, 100g (3.5oz), with a cross pein head, has an Everrtite ash handle. It has a hardened still head and is used for engineering and metal working for accurate installation of small precision fixings such as clips, panel pins etc. Specifications: Head weight: 100g (3.5oz).Overall Length: 325mm (13.1/5in).  

STANLEY® STA154022 FatMax® AntiVibe Brick Hammer 567g (20oz)

This FatMax® Brick Hammer has been designed with one-piece forged construction for strength and durability and the patented AntiVibe technology which reduces vibration transmitted to wrist and elbow. It is ideal for cutting brick, masonry tile and concrete block. The blade has a hardened cutting edge designed to score materials before striking for an even cut.

STANLEY® STA151039 Steelmaster Brick Hammer 500g (18oz)

A Brick Hammer with a tubular steel shaft, light but strong. The soft grip ergonomic handle is non-slip and comfortable. The head is manufactured from heat-treated carbon steel and has a sharp chisel edge for cutting bricks and slate. Weight 500g (18oz).

STANLEY® STA151030 Steelmaster Hatchet 900g (2 lb)

This hatchet has a fully hardened and tempered carbon steel head. The heat-treated, seamless tubular shaft is fitted with a non-slip, solvent resistant grip. Supplied with a protective head cover with a belt clip.

STANLEY® STA145530 Metric Roofing Square 400 x 600mm

Metric Roofing Square 400 x 600mm This Stanley Steel Metric Roofing Square, 400 x 600mm, is designed for roofing calculations and layout of stairs, its face is graduated every 2mm, and on the reverse of the blade every 1/8 inch for detailed work.It has a reversed reading scale and crisply embossed graduations for easy reading. This square has buffed finish and has a protective lacquer...

STANLEY® STA145013 Folding Square 1220mm (48in)

Aluminium folding square with 90° and 45° for versatility of job applications.Ideal for large scale setting out of building profiles, foundations , floor tiling, paving etc. Durable yet lightweight aluminium construction.Folds into a single length for easy storage. Size: 48 x 48 x 68in (122 x 122 x 172cm)

STANLEY® STA133856 Key Ring Tape 2m (Width 13mm)

The Stanley Key Ring Tape has a Mylar coated steel blade with metric graduations and an impressive stand out of 90cm. It has a high-impact ABS plastic case with a soft-grip, rubberised outer casing to help it withstand the usual knocks and bumps. The 2-rivet, corrosion resistant, tru-zero hook allows for accurate inside and outside measurements. The blade is kept firmly in place via a...

STANLEY® STA133090 One-Touch Latch Mobile Job Chest 52 litre

The STANLEY® One-Touch Latch Mobile Job Chest has been designed for storing power tools and hand tools. It features a one-touch latch operation for quick access to tools. Rated to IP43 for resistance to dust and water spray. An integral pull-out tray allows you to organise smaller hand tools, parts and accessories. Fitted with durable wheels and a textured pull handle for easy transportation to and...

STANLEY® STA126357 MAXFINISH 9-in-1 Multi-Tool

This Stanley MAXFINISH 9-in-1 Multi-Tool has a high-quality stainless-steel blade for a longer life. This tool enables you to scrape flat and contoured surfaces due to the specially shaped and sharpened blade.The functions are: scraper, convex scraper, concave scraper, spreader, it cleans paint rollers, sets nails, cleans cracks, nail puller and can opener.  

STANLEY® STA126102 MAXFINISH Mini Roller Kit 100mm (4in)

This Stanley MAXFINISH Mini Roller Kit, 100mm (4in), is suitable for use with all emulsion and wood stains, and is ideal for small area work and perfect for touching up paintwork.Its microfibre technology enables up to twice the paint coverage with minimal splatter. Supplied with a 100mm (4in) microfibre refill.Specification: Size 100mm (4in).