ForgeFix FORDMN2525 Don Quichotte Light Gauge Masonry Nails

ForgeFix Don Quichotte Light Gauge Masonry Nails have a zinc galvanised finish for increased durability. Their extra sharp points assist with quick insertion. Used for fastening trunking, cabling and timber formwork in masonry applications.

ForgeFix FORCSK124B Wood Screws, Slotted, CSK, Brass

These ForgeFix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers...

ForgeFix FORCS630M Coach Screws, Hex Head, ZP

These Forgefix single thread Coach Screws are Zinc plated for increased corrosion resistance. Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers. These Coach Screws conform to DIN 571 standards. APPLICATION:Used widely in heavier timber installations and for fixing timber to masonry. Also popular as a fixing for satellite dish installation together with a rimmed or rimless...

ForgeFix FORCFS72M Concrete Frame Screws, High-Low Thread

These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used...

ForgeFix FORCC50B500 Cut Clasp Nails, Bright Finish

These Forgefix Cut Clasp Nails are specially designed for fitting floorboards. They are sometimes knowns as square nails, due to their rectangular shank shape.The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish.

ForgeFix FORCARS4232 Carcass Screws, Pozi, BP

These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate...

ForgeFix FORC330CB1 Multi-Purpose Clout Nails, Copper

These ForgeFix Multi-Purpose Copper Clout Nails are suitable for use with softwood. They have a slightly larger head that distributes the load directly underneath the top of the nail. Thick sheeting will stay firm and secure. They have a copper finish that ensures the highest possible durability. Used in many roofing applications.

ForgeFix FORBPS4850Z Self-Drill Baypole Screws, Phillips, ZP

These ForgeFix Phillips Baypole Screws with wafer head are specifically designed for joining PVCu sections, particularly in bay windows. The nails have a self-drill tip and are zinc plated for increased corrosion resistance and durability. The wafer head distributes the load under the screw head, offering a firm positive fixing in a similar way to that of a washer. APPLICATION:The large wafer head distributes the...

ForgeFix FORAR20B500 Annular Ring Shank Nails, Bright Finish

These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both softwood and hardwood. The nails have a 'Bright' finish, which is simply the basic raw mild steel...

ForgeFix FOR196808 TechFast Baypole Screws Wafer Head TORX®

ForgeFix TechFast Window Baypole screws are self-drilling screws which are suitable for joining bay window and other metal reinforced PVCu sections. They have a wafer head with TORX® compatible recess. Their No.3 drill tip allows self-drilling into steel up to 4mm.These screws are fire resistant and are protected by 'Elementech' corrosion resistant coating, which has been salt spray tested to 1000 hours. They comply with...

Footprint FOO9007 Thumbturn Pipe Wrench

The Footprint Pipe Wrenches feature a thumbturn knurled nut which provides easy adjustment with one hand. The teeth are induction hardened to ensure a high grip is maintained. This style has a rounded end to the hook handle.

Footprint FOO6987 Pipe Wrench

The Footprint Pipe Wrenches have drop forged hooks and are fitted to a pressed steel frame. The teeth are induction hardened to ensure a high grip is maintained. This traditional plumber's tool is an all purpose wrench which grips the workpiece tighter as more pressure is exerted. Removable screw for easy adjustment. This style has a screwdriver end on the handle.

Footprint FOO591101 590 Cold Chisel

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.

Footprint FOO5781 578 Scutch Comb Holders

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering. Manufactured to British standard.

Footprint FOO25610 256 Brass Back Tenon Saw

The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made...