ForgeFix FORVP15B500 Veneer Pins, Bright Finish

These Forgefix Veneer Pins are ideal for lightweight and decorative tasks. Their shape helps to reduce splitting in hard or brittle wood. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications such as fixings decorative timber mouldings.

ForgeFix FORVE10012M Vine Eyes, ZP

These Forgefix Vine Eyes simply screw into timber and similar materials. Drilling a pilot hole is advisable.The screws are zinc plated for increased resistance to corrosion, and the screw thread is suitable for use with all types of wall plugs. APPLICATION:Vine Eyes are used to attach cables, wires and twine for many numerous applications. Widely used in gardening and agricultural services. Zinc coatings prevent oxidation...

ForgeFix FORUFP638 Universal Wall Plugs, Nylon, Bagged

These Forgefix Universal Fixing Plugs are made from 100% Nylon, providing excellent strength and durability. They are quick and easy to install and provide quicker and greater expansion than normal wall plugs.APPLICATIONSpecially designed for use with lightweight blockwork, aerated hollow block and plasterboard.Suitable for fixing all manner of lightweight fixtures such as shelving, battens, brackets and many other applications.

ForgeFix FORTFW1663 TechFast Bonded EPDM Washers

Forgefix TechFast Bonded EPDM Washers provide a watertight seal. They offer protection against the weather, especially where moisture and condensation are a factor. The washer seals the hole created in the material being fixed and reduces the chance of corrosion.

ForgeFix FORTFMH6332 TechFast Masonry Screws, TX Compatible, Hex

The ForgeFix TechFast Masonry Hex Screw is a self-tapping, no stress alternative to plastic plugs. With an easy 2-step installation: drill a hole in substrate and screw in with a power tool. These screws have an 8mm Hex head with TORX® compatible recess. Protected by an Elementech coating, fire and corrosion resistant. Salt spray tested to 1,000 hours. Complies with EU Safety, Health and Environmental...

ForgeFix FORTFHWD6322 TechFast Self-Drill Stitching Screws, Hex

Forgefix TechFast Self-Drilling Stitching Hex Screws are used to join metal roofing sheet panels together. They are self-drilling up to 2.5mm. The smaller No.1 drill tip can drill through 2 sheets then engage the threads to clamp the sheets together under the head. They have an 8mm Hex head. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested...

ForgeFix FORTFHW63150 TechFast Screws, Composite Roof to Timber

Forgefix TechFast Composite Roof Panel to Timber Hex Screws with 16mm EPDM washers, are used to join composite roof panels to timber frame buildings. The specially designed compression control thread prevents damage and denting of panels. No pre-drilling required, the self-drilling T17 gash point on screws allows for a rapid installation. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt...

ForgeFix FORTFHW5580L TechFast Screws, Composite Panels to Steel, No.3 Tip

Forgefix TechFast Composite Panels to Steel Hex Screws with 16mm EPDM washers, are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are...

ForgeFix FORTFHW5570L TechFast Sheet to Steel, No.3 + Washer

Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.

ForgeFix FORTFHW5532H TechFast Sheet to Steel, No.5 + Washer

Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.

ForgeFix FORTFHT6325 TechFast Sheet to Timber, Hex

These Forgefix TechFast Hex Head Screws are designed specifically for fixing cladding and sheet metal to timber frame work. They have a Hex slash point head and are self-drilling for speedy insertion. The screws have a rubber washer beneath the aluminium flange which expands under pressure and forms a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance,...

ForgeFix FORTFHH5532 TechFast Self-Drill, Heavy Section, Hex

These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to heavy section steel purlins of between 6.0mm and 12.5mm. The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt...

ForgeFix FORTFH63100 TechFast Metal Roofing to Timber, Hex

Forgefix TechFast Metal Roofing Panels to Timber Hex Screws are used to join metal roofing panels to timber frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. No pre-drilling is required and the self-drilling T17 Gash Point on screws makes for a rapid installation. The nails are fire and corrosion resistant, protected by Elementech corrosion resistant coating,...

ForgeFix FORTFH55105H TechFast Screws, Composite Panels to Steel, No.5 Tip

Forgefix TechFast Composite Panels to Steel Hex Screws with 19mm EPDM washers, are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are...

ForgeFix FORTFH5525L TechFast Roofing Sheet to Steel, No.3 Tip

Forgefix TechFast Roofing Sheet to Steel Hex Light Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied without washer.