Trend TREC07814TC CraftPro Round Over Two Flute Cutter, 1/4in Shank

The Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curved edges. With two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. A PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller...

Trend TREC00114TC CraftPro Two Flute Cutters, 1/4in Shank

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide...

Trend TREB16 Replacement Bearings

Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.

Trend TRE463714TC 45° Bearing Guided Chamfer Cutter

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.

Trend TRE46214TC 90° Template Profiler

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of...

Trend TRE11314HS 45° Chamfer V-Groove Cutter

Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.

Toupret TOUTTRPTUB Ready To Use Filler

TOUPRET® Ready To Use Filler is ready-mixed for use on interior surfaces. It's very easy to sand down and it won't flash or grin, so there's no need to spot prime. It can be used on new or renovated substrates, either unpainted or painted: gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks and stone. Can be painted over in 12-24...

Toupret TOUTTREB902 Quick Dry Filler

TOUPRET® Quick Dry Filler for interior surfaces can be overcoated in 3 hours with any conventional paint or wallpaper. It can be filled to any depth without shrinking and offers exceptional adhesion with excellent shaping qualities. Easy to sand and it won't flash or grin, so there's no need to spot prime. It can be used on new or renovated substrates, either unpainted or painted:...

Toupret TOUTTLIPTUB Fine Surface Filler

TOUPRET® Fine Surface Filler offers an exceptionally smooth finish that helps to enhance the appearance of paint finishes. No need to sand or spot prime. Supplied ready-to-use for interior surfaces. It can be used on new or renovated substrates, either unpainted or painted: gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks and stone. Ready to overpaint in 8 hours.

Toupret TOUFGREB01GB Quick Dry Patch & Repair

Toupret® Quick Dry Patch & Repair filler is suitable for gaps, cracks, scratches and holes. Ready to overpaint in just 3 hours. Easy to sand, with no shrinkage, no depth limit and no need to spot prime. Suitable for interior use, manual applications. It can be applied to new or renovated, painted or unpainted substrates:- Gypsum plaster, plasterboard- Old painted surfaces- Primed wood- Cement, concrete,...

Thor THOSPH125 Super Plastic Split Head Hammer

The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be...

Thor THORH125 Hide Split Head Hammer

The Thor Hide hammer has split cast iron head with two hide faces fastened securely to the handle with two socket head cap screws. The head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. There are 5 different weights to choose from in this range. For...

Thor THO912 Super Plastic Hammers

Thor super plastic hammers have a malleable iron head fitted with cylindrical ultra-high molecular weight polythene faces which are designed to wear and be replaced. Available in 3 different weights. The ultra-high molecular weight polythene heads provide high impact, durability and high abrasive resistance. The faces will not fracture, splinter or delaminate. Ideal for use as a general-purpose, soft-faced hammer in engineering applications for assembly,...

Thor THO910SPF Replacement Super Plastic Faces

Thor Replacement white super plastic split head faces are special shaped and manufactured from ultra-high molecular weight polythene which will not fracture, splinter or delaminate on use. The Ultra-high molecular weight Polythene when fitted into Malleable iron heads provide high impact, durability and high abrasive resistance. These faces can be used as an alternative to Rawhide.

Thor THO8050 Cylindrical Hardwood Mallets

Thor Wooden Mallet for woodwork and restoration. Its head is crafted from laminated and compressed wood to a density of 1.3 g/cm³, offering consistent performance and resilience. The distinctive green rings are reinforced glass fibre hoops that enhance durability and prevent splitting under repeated use. This mallet delivers reliable results across various applications, recommended for joinery, wood repair and working with castings. Fitted with a durable anti-vibration, wooden...