STANLEY® STA512020 No.9.1/2 Block Plane with Pouch

This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth.It is ideal for end grain and general-purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide. Cutter seats at 21 degrees. Length: 6.1/4in.Cutter...

STANLEY® STA484489 FatMax® VDE Pliers Set, 4 Piece

These Stanley FatMax® VDE pliers are manufactured to exacting European standards and individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are made from a heat treated, high chrome steel forging for long life and have hand ground,...

STANLEY® STA46053 Adjustable Quick Square 170mm (6.3/4in)

This Stanley Adjustable Quick Square has a black body with yellow graduations providing maximum readability in all light conditions. It features the Common Jack and Hip and Valley scales.This square has a heavy-duty construction, and it is multipurpose with an adjustable design which means it can be used as a rafter square, saw guide. Specification: Size: 170mm (6.3/4in).

STANLEY® STA418226 Parallel Pin Punch Set, 6 Piece

A 6-piece pin punch set made from quality chrome vanadium steel gives increased strength and durability, for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Contains the following sizes: 1.5, 3, 4, 5, 6, and 8mm (1/16, 1/8, 5/32, 3/16, 1/4, 5/16in).

STANLEY® STA246222 Combination Metal Square 300mm (12in)

Combination square with metal body with three machined faces. The steel blade is stamped with metric and imperial sizes and is easy to read. Fitted with a 360° vial for all-round visibility and a scriber for convenience and marking out. Can be used as a try and mitre square, depth or height gauge and spirit level. Size: 300mm (12in)

STANLEY® STA246028 Die-Cast Combination Square 300mm (12in)

This Stanley Combination Square has a precision die cast body with 3 precision machined faces for accuracy. It can be used as a try and mitre square, depth and height gauge and spirit level and it has a 360-degree vial for all round visibility. The steel blade is etched with metric and imperial graduations, and coated for high visibility and is rust resistant. It has...

STANLEY® STA217205 FatMax® Compass Saw 300mm (12in) 11 TPI

This FatMax® saw has triple edged teeth which cut both on the push and pull stroke. The fine teeth make it easier to start off and give control for detailed work. With induction hardpoint teeth for longer life and an improved bi-material handle to maximise user comfort. Suitable for curved or straight cuts in most woods, boards and PVC pipe. Blade Length: 300mm (12in).Teeth: 11...

STANLEY® STA215289 Jet Cut Heavy-Duty Handsaw 550mm (22in) 7 TPI

The Stanley Jet Cut heavy-duty saws have Bi-material handles which are screwed and ultrasonically welded for comfort and security, and allow cutting at 90° and 45°. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting...

STANLEY® STA215244 FatMax® Fine Cut Handsaw 550mm (22in) 11 TPI

The Stanley FatMax® fine cut handsaws have a bi-material handle screwed and ultrasonically welded for comfort and security. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They...

STANLEY® STA210099 99E Original Retractable Blade Knife

The Stanley 99E Original Retractable Blade Knife is made from grey painted die-cast metal body, which is ergonomically shaped for a good, comfortable grip. The blade extension can be controlled by the blade shifter, and 5 blade position allows a wider usage for a variety of cutting applications. The interlock nose firmly secures the blade into knife. For safety, the blade can be fully retracted...

STANLEY® STA210122 Retractable Blade Heavy-Duty Titan Trimming Knife

The Titan retractable knife is ideal for precision cutting of the most flexible to the most resistant materials, such as paper, cardboard, plastic or leather.The lightweight aluminium body has a strong brass wheel for efficient locking of the blade.Supplied with 3 blades.

STANLEY® STA158501 FatMax® Interchangeable Nail Set

The Stanley FatMax® Interchangeable Nail Set has an interchangeable system that accepts conventional bits. Fitted with a bi-material, cushion grip for increased comfort and reduced slipping. Specification Nail Sizes: 1/32, 2/32in.

STANLEY® STA155525 Super Wonder Bar® Pry Bar 380mm (15in)

The Stanley Tools Super Wonder Bar® Pry Bar is made from forged, high-carbon steel for added strength and durability. Polished, bevelled cutting edges with a high-visibility, powder-coated finish. It has an arched centre for swing during nail pulling, no need for an additional wood block. The extended tongue provides added grip and access for hard-to-reach places. Tight radius on bend angle aids in positioning bar....

STANLEY® STA154022 FatMax® AntiVibe Brick Hammer 567g (20oz)

This FatMax® Brick Hammer has been designed with one-piece forged construction for strength and durability and the patented AntiVibe technology which reduces vibration transmitted to wrist and elbow. It is ideal for cutting brick, masonry tile and concrete block. The blade has a hardened cutting edge designed to score materials before striking for an even cut.

STANLEY® STA154077 CP3.1/2 Pin Hammer 100g (3.1/2oz)

This Stanley CP3.1/2 Pin Hammer, 100g (3.5oz), with a cross pein head, has an Everrtite ash handle. It has a hardened still head and is used for engineering and metal working for accurate installation of small precision fixings such as clips, panel pins etc. Specifications: Head weight: 100g (3.5oz).Overall Length: 325mm (13.1/5in).