Knipex KPX9511165 95 Series Cable Shears

Knipex 95 Series Cable Shears with plastic coated handles. Made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life. Precision ground and hardened blades for cutting copper and aluminium cables without crushing or deforming, as well as multiple stranded cables. They can be easily operated with one-hand, low effort required due to high transmission ratio...

Knipex KPX7803125 78 Series Electronic Super Knips®

Knipex 78 Series Electronic Super Knips® for ultra fine cutting work, e. g. in electronics and fine mechanics. With ground, very sharp cutting edges without bevel, cutting edge hardness approx. 54 HRC. The precisely shaped tips cut wires close to a surface from Ø 0.2mm. Made from INOX tool steel with a stainless steel rivet joint for extremely smooth movement for minimum operator fatigue. Controlled...

Knipex KPX7101200 CoBolt® Compact Bolt Cutters

The Knipex 71 Series CoBolt® Compact Bolt Cutters have a lever action mechanism which guarantees an extremely favourable lever ratio with low friction, and cutting performance is 20 times higher than the hand force applied (requires 60 % less effort). CoBolt® compact bolt cutters are ideal for piano wire or for soft solid wire, bolts, nails, rivets and screws. Induction-hardened and with precision cutting edges....

Knipex KPX6801180 68 01 Series End Cutting Nippers

Knipex 68 01 Series End Cutting Pliers with dipped plastic coated handles. Ideal for hard and soft wire cutting. The edges are separately induction-hardened to a hardness of 60 HRc. Also suitable for twisting, binding and cutting soft and annealed tie wire used on reinforcing rods.

Knipex KPX2621200 Bent Snipe Nose Pliers

Knipex 26 Series Bent Snipe Nose Cutting Pliers with long half round jaws and distortion-tolerant, elastic precision tips. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. 61HRC. Available with a Plastic Coated or Multi-component Handles.

Knipex KPX0306160 VDE Combination Pliers

The Knipex 03 06 Series Traditional Combination Pliers with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from a top quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. Chrome plated finish. The jaws have longer cutting edges for thicker cables and gripping...

Knipex KPX0201180 02 01 Series High Leverage Combination Pliers, PVC Grip

The Knipex 02 01 Series High Leverage Combination Pliers with dipped plastic coated handles. They offer a 35% saving in effort compared with conventional pliers due to improved lever action. Made from high-grade special tool steel, forged, multi stage oil-hardened. With gripping zones for flat and round material, suitable for versatile use. They also feature cutting edges for soft and hard wire and long cutting edges...

Knipex KPX8701180 Cobra® Water Pump Pliers, Cushion Grip

The Knipex 87 01 Cobra® Series Water Pump Pliers are made from chrome vanadium electric steel, which has been forged and multi-stage oil-hardened for excellent durability. The gripping surfaces have special hardened teeth, with hardness approx. 61 HRC to ensure high wear resistance and stable gripping. A press-button action allows fast and firm adjustment directly on the workpiece. The pliers allow fine adjustment, for optimum...

Komelon KOMPWB52E Extreme Stand-out Pocket Tape

The Komelon Extreme Stand-out Pocket Tape has a wide, dual printed blade with both metric and imperial graduations. Nylon coated for maximum durability. The blade offers 3.7m of stand-out and is fitted with a heat-treated end-hook. All contained within an impact-resistant PC-ABS case.

IRWIN® Jack® JAK880UN20 880 Universal Hardpoint Panel Saw

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4X the added protection than conventional anti-rust agents. The handle is a proven design, light and strong with an ultrasonic...

IRWIN® IRW10507102 Bi-Metal Blue Snap-Off Blades

The IRWIN Bi-Metal Blue Snap-Off Blades are shatterproof for ultimate safety, making them suitable for universal use in most applications. They also feature soft snap technology for safer segment breakage and stay sharper 3x longer than standard blades.

India INDFB8 B8 Bench Stone

Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.

Hultafors HULGK Craftsman's Knife Heavy-Duty GK

A powerful and durable ground knife suitable for coarse work such as prizing, breaking and hacking. The unique method for attaching the sheath around a button on work clothes means it does not loosen, but is easy to remove. The knife blade is made from 3mm Japanese knife carbon steel that has been hardened to 58–60 HRC with the cutting edge sharpened with a double...

Hultafors HUL650210 Dry Marker Refill, Blister Pack

The Hultafors Dry Marker Refills are supplied in a smart container. The design of the container protects the leads during transport and only ejects one lead at a time. It can be attached with a clip in the pocket or tool bag. Each container has 10 leads for marking on all types of surfaces. Blister Packed.

Hultafors HUL390213 CC Steel Long Tape

The Hultafors CC Steel Long Tape has a unique one-hand grip which allows for optimal handling. Its white steel blade has been graduated using highly accurate inkjet printing and is protected by a matt polyester lacquer which also helps to reduce glare. It is resistant to corrosion and can withstand contact with moisture and the majority of solvents. The steel tape can withstand gentle bending,...