U-Care UCRCL225 Chamois Leather

U-Care 100% Chamois Leather. Made from soft leather with an even surface and finished on both sides. A highly absorbent, medium weight, general purpose chamois.

Trend TRETR1214TC Two Flute Cutter, Extra Long Shank

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood...

Trend TREGB12 Guide Bush

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.

Trend TRESNAPCS4 Snap Countersinks

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.

Trend TREBSC0100 Jointing Biscuits

Trend Jointing Biscuits are made of laminated beech which is compressed before being die-cut. Beechwood biscuits expand up to 20% when in contact with wood adhesives. Biscuit jointing has been proven to be one of the strongest, fastest, safest and most accurate ways to join hardwood, softwood, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise.

Trend TRE30114TC Two Flute Cutter TCT, 1/4in

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Tetrion Fillers TETTFP512 All Purpose Filler, Powder

Tetrion All Purpose Filler is the same tried and trusted formulation which has been the 'go to' for trade decorators and DIY enthusiasts for years. The ideal choice for projects where a versatile, multi-surface filler is required. It's also vibration and shrink resistant. Specially designed to give a super smooth finish for both indoor and outdoor applications. Can be drilled and tapped. Suitable for use...

Teng TENID515 Impact Driver Set 15 Piece 1/2in Drive

A 15 Piece heavy-duty Impact Driver Set in a robust oil-resistant case. When used in conjunction with a medium-sized hammer, an impact driver will loosen or tighten stubborn screws and bolts. Contents :12 x Impact bits: 6 x 36 Flat, 8 x 36 Flat, 10 x 36 Flat, 12 x 36 Flat, PH1, PH2, PH3, PH4,4 mm Hex, 5 mm Hex, 6 mm Hex, 8...

Tacwise TAC0769 16G Angled Finish Nails

Tacwise 16G Angled Finish Nails are galvanised and are for use in nailers and pinners. Compatible with DEWALT DC618, Paslode® IM250A and IM65A F16 Nailers, plus all other brand nailers that take 16G angled nails.

Tacwise TAC0350 140 Series Staples

Tacwise Flat Wire Staple. Ideal for breather membrane (Tyvek, etc), building paper and insulation. For hand/electric staple guns and hammer tackers using 140, T50, G type staples. Compatible with Tacwise A14014V.

Swarfega® SWASJZ500ML Jizer Degreaser

The Swarfega® Jizer Degreaser is a parts degreaser which quickly dissolves heavy deposits of mineral oil, grease, tar, bitumen and waxes. Can be used for removing oil and grease marks from many floor surfaces, tar spots and oil from bodywork and cleaning paint brushes. It is also water rinseable.

STANLEY® STASY750L SY750 Hybrid Performance Gloves - Large

The Stanley SY750 Hybrid Performance Gloves have rugged reverse cowhide finger and palm overlays that provide extra grip. Lightweight, breathable spandex back for a cool and comfortable fit. There is a terry cloth on top of the thumb to quickly absorb perspiration. Elasticated cuffs provide a secure fit. Ideal for general handling. Hand wash only.

STANLEY® STA6MR55 MR55 Right Angle Steel Riveter

Stanley MR55 All steel riveter with an easy spring-loaded handle, which ejects the rivet stem. It has 4 nosepieces and a wrench store in the handle for versatility and convenient storage and accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications. Rugged steel construction for long-lasting durability.

STANLEY® STASTRVG3FQ Medium Pile Polyester Sleeve

This Stanley polyester roller sleeve has a medium pile that is ideal for emulsion and water-based paints. It gives good performance, with great pick-up and coverage and an even finish. The roller sleeve is made from polyester fabric and is suitable for smooth and semi-rough surfaces.

STANLEY® STA428003 DYNAGRIP™ Synthetic Paint Brush

The Stanley DYNAGRIP™ paint brush has tapered synthetic filaments for a smooth finish, with no bristle loss. It has a stainless steel ferrule and a DYNAGRIP™ handle for comfort and control. Suitable for use with all paints. Type: synthetic filament.