J-B Weld JBW8272UK MarineWeld™ Epoxy Adhesive 2 x 30ml

J-B Weld MarineWeld™ is a specially formulated two-part Cold-Weld™ adhesive system which provides strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fibreglass, and others. Sets in 4-6 hours at room temperature and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above...

J-B Weld JBW50172UK MarineWeld™ Epoxy Syringe 25ml

J-B Weld MarineWeld™ Epoxy Syringe is a specially formulated two-part Cold-Weld™ adhesive system that delivers strong, lasting repairs for bonding metal, composites, fiberglass and other surfaces. This marine-grade epoxy resists water, chemicals and UV exposure, making it ideal for tough marine repairs and outdoor applications. Packaged in a convenient 25 ml syringe, this epoxy is easy to mix and apply, allowing precise, controlled repairs wherever...

J-B Weld JBW50176UK KwikWeld™ Epoxy Syringe 25ml

J-B Weld KwikWeld™ is a fast-setting version of the original J-B Weld two-part epoxy Cold-Weld™  system which provides strong, lasting repairs to metal and multiple other surface types. Sets within minutes and cures within just a couple of hours. Resistant to water, chemicals and heat. Cures consistently, no shrinkage/foaming. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled...

J-B Weld JBW50132UK PlasticWeld™ Epoxy Syringe 25ml

The J-B Weld PlasticWeld™ Epoxy Syringe is a specially formulated two-part adhesive and epoxy filler system which provides strong, lasting repairs. Sets in just 5 minutes. Resistant to water, chemicals and heat. Suitable for use on hard plastics, ABS, Fiberglass, PVC, Glass, Vinyl and other composites.  Specifications: Bonding Strength: 3,900 PSI.Set Time: 5 Minutes.Cure Time: 1 Hour.Colour When Dry: Translucent Yellow.Size: 25ml.

J-B Weld JBW31314UK Hi-Temp Silicone Gasket Maker & Sealant Red 85g

J-B Weld JBW31314UK Hi-Temp Silicone Gasket Maker & Sealant in red, 85 g, is a RTV (Room Temperature Vulcanized) silicone gasketing material designed for mechanical assemblies where high heat is present. Withstanding continuous temperatures up to 287°C (550°F) and intermittent peaks up to 343°C (650°F), this gasket maker stays flexible under load to maintain a tight, reliable seal. Upon curing, it forms a durable, flexible...

J-B Weld JBW50101UK MinuteWeld™ Epoxy Syringe 25ml

J-B Weld MinuteWeld™ is a specially formulated, high-strength, two-part instant setting epoxy. MinuteWeld™ will set under most temperature conditions in one minute. Designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal. Specifications: Bonding Strength: 2,300 PSI.Set Time: 1 Minute.Cure Time: 1 Hour.Colour When Dry: Clear.Size: 25ml.

ITL Insulated ITL03122 Insulated Wave Form Holding Tool

The ITL Insulated Wave Form Holding Tool lis made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market,...

ITL Insulated ITL05151 Leather Protector Over Gloves Size 10

ITL Leather Protector Over Gloves, Size 10, for use over rubber gloves/gauntlets. Cut and abrasion resistant. Recommended to prolong the life of rubber gauntlet. CE certified.

ITL Insulated ITL03105 Insulated 3/8in Drive Socket Set, 12 Piece

The ITL 12 Piece Insulated 3/8in Drive Socket Set. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation...

ITL Insulated ITL01930 Insulated Engineers Screwdriver 100mm x 6.5mm

ITL Insulated Engineers Screwdrivers with an injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. ITL insulated tools are the toughest in the market, being virtually indestructible....

ITL Insulated ITL01950 Insulated Slim Slotted Screwdriver 150 x 8mm

The ITL Insulated Slim Slotted Screwdriver made with an injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. ITL insulated tools are the toughest in the market,...

ITL Insulated ITL00031 Insulated Combination Pliers 250mm (10in)

The ITL Insulated Combination Pliers, 250mm, are made for gripping flat and round material. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools...

ITL Insulated ITL00071 Insulated Bent Nose Pliers 150mm

These ITL Insulated 150mm Bent Nose Pliers have a tapered and bent jaw for hard-to-reach places. They are fully insulated, exceed international standards, and have multi use with a cutter.The pliers are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion and are flame retardant.ITL tools are 100% tested with...

ITL Insulated ITL00027 Insulated 1/2in Drive Imperial Torque Wrench Kit, 10 Piece

The ITL 10 Piece Insulated 1/2in Drive Imperial Torque Wrench Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested...

ITL Insulated ITL00141 Insulated Waterpump Pliers 250mm

The Insulated Waterpump Pliers with a groove joint and handles made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in...