Trend TRESTEALTH3 AIR STEALTH P3(R) Nuisance Filter (Pack of 2)

Pair of P3(R) Nuisance Odour Filters for AIR STEALTH half mask. The Twin HEPAC* pleat encapsulated design provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above. *High Efficiency Particulate Air Composite

Trend TRESNAPCB3TC SNAP/CB/3TC TCT Tipped Counterbore 4.75 x 12.7mm

Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Specifications: D1 3/16 inch D1 4.75 mm D2 1/2 inch D2 12.7 mm Shank Diameter 1/4 inch.

Trend TRESNAPHKLC6 SNAP/HKLC/6 Keyless Chuck

The Trend SNAP/HKLC/6 Keyless Chuck can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch.Clamping capacity: 0.8 mm (1/32 inch) to 6 mm (1/4 inch). Enhanced gripping power when compared to traditional key type drill chucks. Lightweight with plastic body. Fitted with snappy shank 1/4 inch hex shank adaptor. Specifications: Shank Diameter: 1/4in hex. Clamping Capacity:...

Trend TRESNAPFLIP SNAP/FLIP/SET Flip Driver Set, 4 Piece

The Trend Snappy Flip Over Driver Set - 4 Piece Set - is for tasks involving multiple piloted countersink and screwing work, the Trend Snappy Flip Bits are designed to speed up the task using a double-ended driver and countersink combination. A very fast and efficient way to pilot, countersink and drive screws by simply flipping the bit to move from drilling to driving, increasing...

Trend TRESETSS3512 SET/SS35X1/2TC TCT Router Cutter Set, 35 Piece

The Trend SET/SS35X1/2TC TCT Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in aluminium carry case. Contains: 1 x Single Flute Cutter 3.2 x 12.7mm 5 x Straight Cutters: 6.3 x 19mm, 9.5 x 25mm, 12.7 x 19mm, 12.7 x 25mm and 19 x 19mm 1 x...

Trend TRESNAPMAG SNAP/MAG Magnetic Holder for Screws

Magnetic screwdriver holder. Designed to hold longer screws securely on to the screwdriver bit, with an extra magnetic ring. Accepts 25 mm insert bits and has an adjustable barrel.Supplied with one No 2 pozi bit.

Trend TRESETSS8TC SS8TC 1/4in TCT Router Bit Starter Set, 12 Piece

Trend 12 Piece Router Bit Starter Set contains a range of the most widely used cutters for decorative woodworking. Made from tungsten carbide with 1/4in shanks and supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 19mm.1 x Dovetail: 104° x 1/2in.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Chamfer: 45°.1 x Guided Rebater: 9.5mm.1 x...

Trend TRESETSS3114 SET/SS31X1/4TC TCT Router Cutter Set, 30 Piece

The Trend SET/SS31X1/4TC Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in an aluminium carry case. Contains: 9 x Non-bearing Straight Cutters: 5 x 12mm, 6 x 20mm, 8 x 20mm, 10 x 20mm, 12 x 20mm, 14 x 20mm, 16 x 20mm, 18 x 20mm and...

Trend TRESETSS9TC SET/SS9TC 1/2in TCT Router Bit Starter Set, 15 Piece

Trend SET/SS9TC 15 Piece Router Bit Starter Set contains a range of popular 1/2in tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 1 x Single Flute: 4.8 x 11mm.3 x Two Flute: 6.3 x 19mm, 12.7 x 25mm and 19 x 25mm.1 x Dovetail: 12.7mm.2 x Guided Round Over:...

Trend TRESNAPHDSET SNAP/HD/Set Drill Set, 7 Piece

The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in the sets to enable drills to be removed with two spanners.7 piece drill set.1.5, 2, 2.5, 3, 4, 5 and 6mm.Supplied in a storage tube.

Trend TRESET6PC14 1/4in TCT Router Cutter Set, 6 Piece

This Trend 1/4in Router Cutter Set has a range of tungsten carbide tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 25mm.1 x V-Groove: 45° x 12.7mm.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Ogee: R4mm.

Trend TRERT35 RT/3.5 TORX Replacement Screws

The Trend Rota – Tip Replacement Screws are tapered head replacement screws for Trend Rota- Tip router cutters. They are high quality replacement screws providing the correct fixings to secure the Rota-Tip blades for maximum performance.The Torx head fitting ensure secure tightening pressure when fitting blades, the 6mm tapered head provide correct clamping pressure to the blades for safe operation and ensures the Rota-Tip cutters...

Trend TRESET50PC14 1/4in TCT Router Bit Starter Set, 50 Piece

The Trend 50 Piece Router Bit Starter Set contains a range of popular 1/4in tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in an aluminium carry case. Contains: 2 x Single Flute Straight: 3 x 12.7mm and 4 x 12.7mm.8 x Two Flute Straight: 6 x 16mm, 8 x 19mm, 9.5 x 19mm, 12.7 x...

Trend TREPHJUGBS Single Pocket Hole Jig

The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or...

Trend TREHINGEJIG Hinge Jig

The Trend Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames. Used on-site and in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick and simple to set-up as the hinge is used as the pattern. Clean and accurate recesses are achieved every...