Monument MON1925 1925P Hacksaw Blades 300mm (12in) x 24 TPI Pack 5

Pack of 5 Monument Hacksaw Blades made from high speed steel (HSS). Suitable for the Monument 1921D Hacksaw Frame. Teeth: 24 TPI.Length: 300mm.

Monument MON1024 1024C Trimming Knife Blades (Pack 10)

Monument trimming knife blades, suitable for the trade trimming knife. Supplied in a dispenser.Quantity: 10.

IRWIN® IRW4935496 Bi-Metal Reciprocating Blade Set, 11 Piece

The IRWIN Bi-Metal Reciprocating Blade Set contains a selection of blades that cover the most popular cutting applications. Wood cutting blades are great for roughing-in work and nail-embedded wood. Metal cutting blades cut all metals including non-ferrous pipe conduit, stainless steel and sheet metals. Contains the following: 5 x Nail Embedded Wood Bi-Metal Blades 152mm x 6 TPI4 x Thick Metal Bi-Metal Blades 152mm x...

IRWIN® IRW1897209 General Purpose Table & Mitre Saw Blade, ATB

IRWIN General Purpose Table & Mitre Saw Blade with construction grade tungsten carbide tips that retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated...

IRWIN® IRW10507846 MRB Masonry Sabre Saw Blade

The IRWIN MRB Masonry Sabre Saw Blade is highly durable and allows fast and precise cutting in many masonry materials such as clay bricks, limestone and gas concrete. Teeth: 2.5 TPI.

IRWIN® IRW10507365 Sabre Saw Blade 800RG Carbide Grit 200mm Pack of 2

These Irwin® Sabre Saw Blades 800RG Carbide Grit, 200mm, can cut through cast iron, fibreglass, ceramic tile, clay, pipe, stone, brick, plaster and marble.Specifications: Length: 200mm.Tooth pitch: Carbide grit.Comes in a pack of 2.

IRWIN® IRW10505824 Bi-Metal Snub Nose Safety Knife Blades

Irwin Snub Nose Bi-Metal Safety Knife Blades The snub nose blade design helps to reduce the risk of accidental puncture wounds. Shatterproof bi-metal blades combine the best of 2 metals, electro-welded together for superior performance and safety. Bi-metal blades stay sharp up to 3 x longer than carbon steel blades.

IRWIN® IRW10505817 HCS/HSS T-Shank Jigsaw Blade Set, 10 Piece

This 10 Piece IRWIN Jigsaw Blade Set contains the following: 2 x 10504221 (T111C) Wood Cutting 100mm 8 tpi.2 x 10504218 (T144D) Wood Cutting 100mm 6 tpi (fast cut).2 x 10504219 (T101B) Wood Cutting 100mm 10 tpi.1 x 10504222 (T101D) Wood Cutting 100mm 6 tpi (clean cut).2 x 10504220 (T118A) Metal Cutting 92mm Progressive 17 - 23 tpi.1 x 10504225 (T118B) Metal Cutting 92mm Progressive...

IRWIN® IRW10504567 Snap-Off Blades

These IRWIN Snap-Off Blades are made from carbon steel. Pack quantities of either 5 or 10 strips. Available Sizes: 9mm, 18mm and 25mm.

IRWIN® IRW10504520 Bi-Metal Hacksaw Blades

IRWIN® Bi-Metal Hacksaw Blades are safer than HSS blades. They are flexible, shatter resistant and are suitable for use on a variety of metals.

IRWIN® IRW10504290 U111C Jigsaw Blades Wood Cutting Pack of 5

These Irwin® Jigsaw Wood Cutting Blades are made from carbon steel for use on softer materials such as wood, laminated chipboard, and plastics.They have a universal shank with 3 sided, fleam ground teeth for fast cut and clean finishes in all wood applications.Fast, coarse cuts in hard and soft wood, plastics 5-60 mm (7/32 -2 3/8in). Specifications: Length: 100mm.Pitch: 8 Standard, Wood Cutting.Packs of 5....

IRWIN® IRW10504240 Bi-Metal Trapezoid Knife Blades

Irwin Bi-Metal Trapezoid Knife Blades combine the best of 2 metals electro-welded together. The edge of the blade is made from high-speed steel, which is much harder than standard carbon steel, and has been shown to last up to 3x longer in user trials on plasterboard, drywalling, roofing, insulation, flooring and other heavy-duty materials. The bulk of the blade is made from spring steel, which...

IRWIN® IRW10504233 T123X Metal Cutting Jigsaw Blades Pack of 5

Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminium, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal. Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Progressive tooth spacing, for fast cuts, long life, in sheet metal 2-10mm, non-ferrous metal 2-20mm, stainless steel...

IRWIN® IRW10504234 Metal Cutting Jigsaw Blades Pack of 5 T118G

Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminium, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal. Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Straight cuts in thin metal, non-ferrous metal, sheet metal, aluminium 0.2-1 mm (1/64Inch -3/64in). Length: 92mm.Pitch: 36....

IRWIN® IRW10504225 Metal Cutting Jigsaw Blades Pack of 5 T118B

Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminium, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Straight cuts in metal, non-ferrous metal, aluminium, sheet metal, 3-6 mm (1/8Inch -1/4in). Length: 92mm.Pitch: 20. Supplied...