Trend TREDEALCRA Small Craft Cabinet Deal 75 Pieces

This Trend Small Craft Cabinet Deal contains the following: 3 x C005 x 1/4 TCT Two Flute Cutters 6.0 x 16.0mm 3 x C008 x 1/4 TCT Two Flute Cutters 6.3 x 25.4mm 3 x C012A x 1/4 TCT Two Flute Cutters 8.0 x 25.0mm 3 x C016 x 1/4 TCT Two Flute Cutters 10.0 x 19.1mm 3 x C019A x 1/4 TCT Two Flute...

Trend TREDLIFTA Door Lifter A

This Trend foot operated Tredlifta Lifter A is used to support the door while fitting into the door frame, it is foot operated freeing up the users’ hands. It slides under the door, stays flat and stable until ready to activate the lift with the user’s foot.It will lift 38mm high and hold a maximum weight of 108kg.Made from plastic and non-marring, they have a...

Trend TREDSTAND Door Stand 32mm - 55mm D/STAND/A

The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door to be tilted back to assist fitting into the frame. Maximum door weight 50kg.

Trend TREDWSLF100 DWS/LF/100 Lapping Fluid 100ml

Trend's Lapping Fluid is designed solely for use in the engineering industry and is suitable with all quality diamond abrasive products. Use this instead of water to reduce the threat of rusting by 95%. It reduces the possibility of clogging, excessive build-up of residue and improves diamond performance.It has penetrating qualities and oil/water solubility, which not only increases the cutting action but also assures superior...

Trend TREESCRIBE EASYSCRIBE Scribing Tool

The Trend EASYSCRIBE is a handheld scribing tool for architrave, skirting, scribing doors, scribing worktops, setting hinge recess depth, etc. Fitted with an articulated arm that allows the required offset to be set precisely, from 1mm to 40mm, for increased flexibility. It has a thin guide plate (0.5mm) for access into narrow gaps ensuring full versatility. The flat base ensures constant contact for a consistent...

Trend TREFFP2NR10 FFP2 NR Fold Flat Mask (Pack 10)

Trend FFP2 NR Fold Flat Mask with HEPAC filtration for protection against fine, nuisance dust particles, such as softwood dust, sheet materials, (not MDF or hardwood) and fibreglass. With efficiency above 94% for increased respiratory protection. The entire surface area of the mask is the filter making it highly efficient whilst also making breathing easier. It provides day-long protection, up to 8 hours. Elasticated, adjustable...

Trend TREFFS120 Folding Flush Cut Saw 120mm (4.3/4in) 22 TPI

This Trend Folding Pocket Flush Saw is suitable for cutting dowels, plugs and dovetails.Manufactured in Japan, the non-set teeth can cut right at the surface without marking the surface, which makes it ideal for dowel trimming and dovetail joint trimming. The blade is 0.4mm thick, which allows flexibility to allow cutting flush with the surface. The 120mm blade has a fine polished finish with 22...

Trend TREGAUGED60 GAUGE/D60 Digital Depth Gauge

Trend GAUGE/D60 Digital depth gauge for router tables and saw benches. Horizontal and vertical measuring, ideal for hand routers, router tables and saw benches. It has an LCD readout for mm, imperial and fractions with auto shut off 5 mins. The removable pin allows hole depths to be measured. The pin can be parked on arm. Hole depth 50.8mm (2 inch).

Trend TREGB12 Guide Bush

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.

Trend TREGB5 GB5 Sub Base C/W Bush & 2 Pins

Introducing the Trend TREGB5 GB5 Sub Base C/W Bush & 2 Pins — a round sub base that can be used as a guide itself, delivering precise control and consistent results in every routing project. Built to enhance accuracy, compatibility, and ease of use, this sub base is a must-have for professional and hobbyist woodworkers alike. Supplied with: 10 mm guide bush 1/4 in and...

Trend TREGRABSE1SE GRAB/SE1/SET Grabit Remover Set 2 Piece

This Trend GRAB/SE1/set Damaged Screw Remover Set (2pc) has versatile double-ended bits to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. Made from high-speed steel they can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8, they will remove these cleanly from wood, metal or plastic.Removing screws made of any alloy, including soft...

Trend TREHINGEJIG Hinge Jig

The Trend Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames. Used on-site and in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick and simple to set-up as the hinge is used as the pattern. Clean and accurate recesses are achieved every...

Trend TREHJIGA 2 Part Hinge Jig H/JIG/A

Meet the Trend TREHJIGA 2 Part Hinge Jig (H/JIG/A) — a portable, two‑part template set built to recess hinges precisely in wooden doors and frames. Designed for on‑site use and joinery shops, this jig minimizes setup time while delivering consistently accurate results, boosting productivity and quality on every project. Key features: Two‑part hinge jig for stable, accurate hinge recessing with versatile positioning. Portable template set...

Trend TREHJIGC HJIGC 2 Part Skeleton Hinge Jig

The Trend Skeleton Hinge Jig is a 2-part, adjustable portable template set designed for recessing hinges in wooden doors and frames with a router. It is easy to use with minimal setting-up time, ensuring the job can be completed accurately and quickly. It is ideal for use on-site and in joinery shops to increase productivity with excellent results.The jig has fully adjustable apertures for fire...

Trend TREKWJ650 Kitchen Worktop Jig with Peninsular Cut 650mm

Trend Kitchen Worktop Jig for worktops up to 650mm. Made from hard-wearing, CNC machined Compact Grade High-Pressure Laminate, 12mm thick. Cuts both parts of the joint in 15 minutes, including setting up. For cutting: left and right-hand corners, 400mm radius peninsular joint and 35mm kitchen door hole. With fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts worktops up to 40mm thick, with...