Trend TRE461712TC Bearing Guided Ovolo & Round Over Cutters

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk...

Trend TRE46214TC 90° Template Profiler

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of...

Trend TRE463714TC 45° Bearing Guided Chamfer Cutter

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.

Trend TRE4639012TC 46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm

This Trend 46/390x1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is supplied as standard with ref: BR/191 fitted.There are a variety of bearing rings available to give various rebate sizes. These rings are secured between the two bearings. D: 50.8 mm.C: 22.5 mm.B: 12.7 mm.E: 19.1 mm.E: 15.9 mm.OL: 78 mm. Specifications:...

Trend TRE464414TC 46/44 x 1/4 TCT Bearing Guided Rebater 24mm x 12.7mm

This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut.This set is ideal for rebating straight and shaped work pieces, particularly with delicate applications such as musical instrument production when a small rebate is required for insertion of purfling. Specifications: Tooling TCT.1/4in Shank. By changing the bearing, the size of the rebate...

Trend TRE469412TC 90° Shank Mounted Template Profiler

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to...

Trend TRE47414TC 47/4 x 1/4 TCT Pierce & Trim Cutter 6.3 x 18mm

This Trend 47/4 x 1/4 TCT Pierce & Trim Cutter will pierce and cut out an aperture in laminate worktops. The base of the cutter acts as a guide follower. Specifications: Single Flute cutter.Cutting Length: 18mm.Diameter: 6.3mm.Shank. 1/4in.  

Trend TRE5114TC 5/1 x 1/4 TCT Hinge Recessor 12.7 x 19mm

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges.Corners will require final trimming square with a hand chisel or a corner chisel. Diameter: 12.7mm.Cutting length: 19mm.Shank: 1/4in.

Trend TRE63127 Collet Sleeves

Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.

Trend TREAIRP6A AirPro Max Ear Defenders

Trend AirPro Max Ear Defenders for use with the Airshield Pro (AIR/PRO) and AirPro Max (AIR/PRO/M) powered respirators. The easy clip-on adaptor system ensures a secure fit. Comfortable, durable and lightweight design for longer life. Fitted with soft foam-covered cushions for increased user comfort. SNR Rating: 29 dB

Trend TREAIRPM1 AirPro Max THP3 Filter

The Trend AirPro Max THP3 Filter provides respiratory protection to BS EN 12941:1999. Covers all types of dust generated when working in hard and softwoods, ply, MDF and other timber-based materials. Simple to swap over, the filters ensure you are always guaranteed full protection from harmful dust. It has a nominal protection factor of 500.

Trend TREAIRPRO Airshield Pro Powered Respirator

The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941. New features include:Combination face-seal and hood to improve protection.Motor positioned away from the sensitive area of the forehead to reduce noise and irritation.Attachment points for optional ear defenders.Strategic component distribution ensures...

Trend TREB16 Replacement Bearings

Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.

Trend TREBSC0100 Jointing Biscuits

Trend Jointing Biscuits are made of laminated beech which is compressed before being die-cut. Beechwood biscuits expand up to 20% when in contact with wood adhesives. Biscuit jointing has been proven to be one of the strongest, fastest, safest and most accurate ways to join hardwood, softwood, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise.

Trend TREC00114TC CraftPro Two Flute Cutters, 1/4in Shank

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide...