STANLEY® STA151276 FatMax® All Steel Rip Claw Hammer

The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.

STANLEY® STA151488 Blue Strike Claw Hammer

The curved claw head is made from forged, heat-treated steel and the oval tubular steel shaft combines strength with a lightweight feel.The flock filled vinyl grips are impervious to heat, oil and most solvents.

STANLEY® STA154022 FatMax® AntiVibe Brick Hammer 567g (20oz)

This FatMax® Brick Hammer has been designed with one-piece forged construction for strength and durability and the patented AntiVibe technology which reduces vibration transmitted to wrist and elbow. It is ideal for cutting brick, masonry tile and concrete block. The blade has a hardened cutting edge designed to score materials before striking for an even cut.

STANLEY® STA154077 CP3.1/2 Pin Hammer 100g (3.1/2oz)

This Stanley CP3.1/2 Pin Hammer, 100g (3.5oz), with a cross pein head, has an Everrtite ash handle. It has a hardened still head and is used for engineering and metal working for accurate installation of small precision fixings such as clips, panel pins etc. Specifications: Head weight: 100g (3.5oz).Overall Length: 325mm (13.1/5in).  

STANLEY® STA154708 Ball Pein Hammer, Graphite Handle

The Stanley engineers ball pein hammers are designed with a solid graphite core shaft. These hammers offers long life and durability and have a rim tempered poll and ball pein to prevent chipping during use. The hammers also have a patented head to handle assembly for improved safety and the comfortable handle is made from a vinyl compound.

STANLEY® STA155008 FatMax Spring Steel Claw Bar

This Stanley FatMax Claw Bar is manufactured from spring steel for durability with a high visibility powder coated finish and polished tips. The polished bevel claws allow for precision nail pulling and prying and the non-slip grip provides increased leverage.

STANLEY® STA155009 FatMax® Spring Steel Moulding Bar 250mm (10in)

This Stanley FatMax® Moulding Bar is manufactured from spring steel for durability with a high visibility powder coated finish and polished tips. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim reducing material damage. The non-slip grip provides increased leverage.

STANLEY® STA155513 FatMax Spring Steel Wrecking Bars

The Stanley FatMax® Spring Steel Wrecking Bar is an ideal tool for all builders, carpenters and plumbers and is widely used in factories, warehouses and the farming industry. Manufactured from round spring steel, which is hardened and tempered to ensure maximum strength and durability, and with double ended claw ends. Ideal for opening packing cases, pulling out nails, levering off, shuttering etc.

STANLEY® STA155515 Wonder Bar® Pry Bar

The Stanley Wonder Bar® is manufactured from heat-treated, forged, high-carbon steel with a powder-coated finish and polished tips. One end has a high-visibility powder-coated finish. It has bevelled nail slots and the contoured bar makes pulling, prying and lifting easier.

STANLEY® STA155525 Super Wonder Bar® Pry Bar 380mm (15in)

The Stanley Tools Super Wonder Bar® Pry Bar is made from forged, high-carbon steel for added strength and durability. Polished, bevelled cutting edges with a high-visibility, powder-coated finish. It has an arched centre for swing during nail pulling, no need for an additional wood block. The extended tongue provides added grip and access for hard-to-reach places. Tight radius on bend angle aids in positioning bar....

STANLEY® STA156001 AntiVibe Lump / Club Hammer 1.3kg (3 lb)

This lump/club hammer has been designed with a one-piece forged construction for strength and durability. The patented anti-vibe technology reduces vibration transmitted to wrist and elbow. Ideal for use in confined work areas with little room for a full arc-swing. The wide face makes it ideal for striking chisels and punches.Weight: 1360g (3 lb).

STANLEY® STA158501 FatMax® Interchangeable Nail Set

The Stanley FatMax® Interchangeable Nail Set has an interchangeable system that accepts conventional bits. Fitted with a bi-material, cushion grip for increased comfort and reduced slipping. Specification Nail Sizes: 1/32, 2/32in.

STANLEY® STA166930 FatMax® Wrecking Knife 25mm

The Stanley FatMax® Wrecking Knife has a 4mm, double-edged blade, that is ideal for demolishing, leveraging and splitting. Fitted with a rubber coated ergonomic grip for greater safety and leverage. The striking cap allows the knife to be hit with a hammer, speeding up work progress. Blade Width: 25mm

STANLEY® STA168724 Phillips/Pozidriv/TORX Insert Bit Set, 10 Piece

This 10 piece screwdriver bit set contains 9 x 25mm assorted screwdriver bits and a magnetic holder. Supplied in a flip-up plastic storage box. Contains:1 x 25mm Phillips: PH2.3 x 25mm Pozidriv: PZ1, PZ2 and PZ3.5 x 25mm TORX: TX10, TX15, TX20, TX25 and TX30.1 x Magnetic Bit Holder.

STANLEY® STA168734 Slotted/Phillips/Pozidriv Insert Bit Set, 10 Piece

This Stanley 10 piece screwdriver bit set is supplied in a flip-up plastic storage box. Contains: 3 x 25mm Phillips Bits: PH1, PH2 & PH3.3 x 25mm Pozi Bits: PZ1, PZ2 & PZ3.3 x 25mm Slotted Bits: 4.5x0.6, 5.5x1.0 & 6.5x1.2mm.1 x Magnetic Bit Holder.