STANLEY® Intelli Tools INT177409 TLM 50 Laser Measurer 15m

The STANLEY® TLM 50 Laser Measure can measure length with a single button, simple to use, both for taking simple measurements and for continuous measures. It has a compact, lightweight design with an ergonomic rubber casing. Its back lit display clearly shows measurements, even in dark areas. Also has an auto power off that saves battery power. Specification: Accuracy: ± 3mmOperating Range: 15mPower: 2 x AAA...

STANLEY® Intelli Tools INT177498 Cubix™ Cross Line Laser Level (Red Beam)

The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright red vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a red vertical line and horizontal line. Fitted...

STANLEY® Intelli Tools INT177499 Cubix™ Cross Line Laser Level (Green Beam)

The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright green vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a green vertical line and horizontal line. Fitted...

STANLEY® Intelli Tools INT177502 Cross90™ Laser (Red Beam)

The Stanley Intelli Tools Cross90™ Red Beam Laser is self-levelling and projects a 100° vertical beam, horizontal beam and an additional 90° vertical beam. The 90° beam is ideal for tile or flooring installation or to lay out partition walls with ease. The body is fitted with overmould housing and rubber bumpers on all corners for protection against knocks. Easy-to-use, fitted with a touch pad...

STANLEY® Intelli Tools INT177504 360° Cross Line Laser (Red Beam)

The Stanley Intelli Tools 360° Cross Red Line Laser Level projects a 360° horizontal line and 100° vertical line. Ideal for use in a wide variety of jobs, including woodworking, drywall installation, framing and roofing. The body is fitted with overmould housing for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50...

STANLEY® Intelli Tools INT177592 Cross90™ Laser (Green Beam)

The Stanley Intelli Tools Cross90™ Green Beam Laser is self-levelling and projects a 100° vertical beam, horizontal beam and an additional 90° vertical beam. The 90° beam is ideal for tile or flooring installation or to lay out partition walls with ease. The green beams allow for enhanced visibility while working. The body is fitted with overmould housing and rubber bumpers on all corners for...

STANLEY® Intelli Tools INT177594 360° Cross Line Laser (Green Beam)

The Stanley Intelli Tools 360° Cross Green Line Laser Level projects a 360° horizontal line and 100° vertical line. Ideal for use in a wide variety of jobs, including woodworking, drywall installation, framing and roofing. The body is fitted with overmould housing for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50...

STANLEY® Respiration STMF011021 P3 R Half Mask Respirator

The STANLEY® P3 R Half Mask Respirator has a specifically angled grill design that protects 100% of the filter surface area from particulates directly clogging the filter. This ensures better filtration efficiency and breathing resistance. It offers protection from dust, metal fumes, oil, water mists and micro-organisms. Advanced Face-Fit-check™ technology allows face seal validation to ensure less inward leakage before use. A fully elasticated 2...

STANLEY® Respiration STMF012009 P3 Replacement Filters (Pack of 2)

STANLEY® P3 Replacement Filters are for use with the Stanley Half Mask and Visor and Half Mask. Hepac® advanced filter technology offers maximum filtration removing up to 99.99% of all airborne particles whilst offering  the lowest breathing resistance. Pre-filter as standard helps prevent clogging therefore extending the life of the filter. Supplied as a pack of 2.Made in the UK. Conforms to EN143:2000.

STANLEY® Respiration STMF021002 FFP3 R D Lite Pro Dust Mask Respirator

The STANLEY® FFP3 R D Lite Pro Dust Mask Respirator offers protection from dust, metal fumes, oil, water mists and micro-organisms. It has a fully elasticated strap for the ultimate face seal that offers an ultra-low breathing resistance using Hepac-lite ® filter technology. The multi shift respirator has a downward facing exhalation valve to prevent fogging of glasses. Hypoallergenic, latex and silicon free. Made in the...

STANLEY® Respiration STMF031005 All-In-One Visor & Dust Mask Respirator

The STANLEY® All-In-One Visor & Dust Mask Respirator has a specifically angled grill design that protects 100% of the filter surface area from particulates directly clogging the filter. This ensures better filtration efficiency and breathing resistance. It provides protection from dust, metal fumes, oil, water mists and micro-organisms. Advanced Face-Fit-check™ technology allows face seal validation to ensure less inward leakage before use. A fully elasticated...

STANLEY® Spares SSP112701 Kit 2 Large Bailey Plane Handles

Stanley spares kit 2 fits product numbers 12-045, 005, 055, 006, 007, 145, 015, 155, 016, 011 and 017 plus 12-905 and 906. Contents: 1 x 12216C Handle. 1 x 33001C Handle Rod (metric). 1 x 83258C Handle Rod (imperial). 1 x 12192C Knob. 1 x 32988C Knob Rod (metric). 1 x 83271C Knob Rod (imperial). 2 x 36122C Knob and Handle Nuts (metric). 2...

STANLEY® STA003105 105 Hand Drill

This Stanley single pinion hand drill has a 3-jaw chuck for greater versatility. It has an aluminium gear wheel which is long lasting, strong, and lightweight. It has a mandrel with three 8mm diameter bits. Made of precision die cast for strength and durability.Specification: Length: 265mm.

STANLEY® STA005867 Stainless Steel Mud Pan 305mm (12in)

The Stanley STA005867 Mud pan has a stainless steel pan used for holding plaster which is easy to clean and durable. The design ensures that material will not leak from the pan. This mud pan has the following dimensions:Length in mm: 305mm.Length in inches: 12.

STANLEY® STA005895 Stainless Steel Taping Knife

The Stanley Stainless Steel Taping Knife has a bi-material handle for comfort and protection. Its stainless steel blade prevents rust and provides durability. The blade has been tapered from handle to tip to provide flexibility. With a smooth zinc alloy cap for durability and a hang hole in the handle for easy storage.