Bostitch BOSN203R40G8 Coil Ring Nails N Series

Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters...

Bostitch BOSSBHC50FN SB-HC50FN Pneumatic Concrete Block Nailer 20-50mm Nails

The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive...

Bostitch BOSRH2545G50 Galvanised Ring Shank Stick Nails PL Series

Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the...

Bostitch BOSMCN150G38 MCN Anchor Galvanised Nails 38mm for MCN150 PT-MC375SP38G (Pack 4000)

Bostitch PT-MC Series Fasteners (PT-MC375SP38G) MCN Galvanised nails. This type of collation is ideal in construction environments where work can be kept free of collation debris. Diameter: 3.75mmHead: 7.2mmLength: 38mm Profile: TwistRing shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the...

Bostitch BOSMCN4R38G MCN Anchor Stick Ring Galvanised Nails 4.00 x 38mm (Pack 2000)

Galvanised ring nail anchor stick for use with N88RH-2MCN-E only when MCN is fitted. Galvanised to 15 microns.Ring shank with conical head which centres the nail in the pre-drilled hole. Gauge/Diameter (mm) 4 Length 38 21° Collation Angle Profile RING Finish G8 Description ANCHOR STICK 4 .00-38 RING GAL 2M Qty per box 2000 Fits F21PL-E For use with N88RH-2MCN-E only when MCN is fitted...

Bostitch BOSN66C2E N66C-2-E Pneumatic Coil Nailer Variable Depth Control

The high capacity N66C-2-E coil nailer is designed with a tough, resilient housing but uses light weight materials, making this tool ideal for all day use. The fastener depth adjustment gives ultimate control, and the tool is also compatible with both plastic and wire collated nails for maximum flexibility. Specificiations: Magazine Capacity: 225 (max).Nail Length: N Series: 32-64mm.Nail Diameter: N Series: 2.03-2.5mm.Nail Head: 4.5mm.Operating Pressure:...

Bostitch BOSR501908 Powerslam Staples

Powerslam staples available in packs of 5,000, for use with the Powerslam Hand Tacker (BOSPC2K).

Bostitch BOSMCN150E MCN150-E Pneumatic Strap Shot Metal Connecting Nailer 38mm

The Bostitch MCN150-E Strap Shot Metal Connecting Nailer is incredibly lightweight and simple to use and maintain. Compact metal connecting nailer with Sequential Trip Trigger, adjustable exhaust. It is designed to allow access to even the tightest corners, and the innovative exposed-tip design positions the fastener directly into the connector plates holes for faster and more accurate positioning than ever before. The award winning StrapShot...

Bostitch BOSFN1664E FN1664-E Pneumatic Magnesium Finish Nailer 16 Gauge 25-64mm

The Bostitch 16 gauge FN1664-E finish nailer represents great value for money with the design incorporating class leading features. The FN1664-E has a light weight magnesium construction body, no-nail lockout, rear exhaust and selectable trigger without compromising the high durability and build quality that has made Stanley Bostitch the market leader in performance pneumatic tools for construction. Specification Magazine Capacity: 110 (max).Fires: SB16 Series: 25-64mm.Operating...

Bostitch BOSF28WWE F28WW-E Pneumatic Wire Weld Stick Nailer & Case

This latest evolution of the best selling N88WW framer brings even more power to the job with a 5% increase in driving power together with a weight reduction. The waisted body design gives a much improved sightline to the tool nose. The handle has been lowered to improve balance and comfort in use; along with other design improvements these features will keep this tool firmly...

Bostitch BOSF33PTSME F33 PTSM Pneumatic 33° Paper Tape Framing Nailer

The Bostitch F33PTSM-E framing nailer features a short magazine for ease of use in tight spaces and has a Dial a Depth function. The paper tape nails are compatible with pazlode (IM350) framer. The powerful engine is capable of driving stick nails upto 90mm in length, whilst the lightweight magnesium body makes it comfortable to use all day long. It has CE compliant sequential trip...

Bostitch BOSF280R50G8 Coil Ring Nails FAC Series for N71, N75, N80, N89

Bostitch FAC Series Flat Angle Coil Pattern Ring Coil Nails are designed for high volume operation. The coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them used in the pallet and crate, fencing, garden furniture and the construction industries. To Suit: N71C-1-E, N75C-2-E, N80CB-1ML, N89C-1P-E, N89C-2K-E All Coil Nails are Round Head nails....

Bostitch BOSF21PLE F21PL-E Pneumatic Roundhead & MCN Stick Nailer 38-90mm

The Bostitch F21PL-E Roundhead & MCN Stick Nailer has a waisted body design to improve sightline and a repositioned handle to give balance and comfort in use. Using 21° plastic collated framing nails hot dip galvanized to 50 microns and specially designed positive placement nails. This tool is perfect for all framing and first fix applications where good corrosion resistance is required and of course...

Bostitch BOSCPACK30 CPACK30 30m Air Line Hose On Reel

The Bostitch CPACK30 is a fully assembled air line hose on a swivelling hose reel, supplied with 6.3mm FPT (female pipe thread) plug and a 6.3mm FPT (female pipe thread) socket. Specifications: Length: 12.5mm hose x 30 metres.Max. Operating Pressure: 241 psi, 15 bar.

Bostitch BOSCPACK15 CPACK15 15m Hose with Connectors & Oil

The Bostitch CPACK15 Combo Pack comes with everything you need to hook a Bostitch Pneumatic tool to a compressor. Contains: 1 x 15.5mm x 15m Air Hose.1 x Pipe Thread Seal Tape.1 x Bottle of Pneumatic Tool Oil.1 x 6.3mm Female Pipe Thread Plug (FPT).1 x 6.3mm Male Pipe Thread Plug (MPT).1 x 6.3mm Female Pipe Thread Socket (FPT).1 x 6.3mm Male Pipe Thread Socket...