Trend TRE6204WS Countersinks

Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals.

Trend TRE468014TC 90° Bearing Guided Triple Flute Cutter

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.

Trend TRE463714TC 45° Bearing Guided Chamfer Cutter

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.

Trend TRE463912TC 46/39 Bearing Guided Rebate Set

Popular rebate sets which include different size bearings for a choice of rebates. They provide easy setting up and accurate depth of cut. Ideal for rebating straight and shaped work pieces . Tooling TCT. By changing the bearing the size of the rebate can be altered.Supplied with four bearings.19 mm Bearing gives rebate of 7.9 mm16 mm Bearing gives rebate of 9.5 mm12.7 mm Bearing...

Trend TRE461712TC Bearing Guided Ovolo & Round Over Cutters

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk...

Trend TRE469412TC 90° Shank Mounted Template Profiler

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to...

Trend TRE46214TC 90° Template Profiler

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of...

Trend TRE320L14TC Two Flute Cutter D-Namic Carbide, 1/4in

Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass.

Trend TRE34214TC Bearing Guided Biscuit Jointer

342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width...

Trend TRE361014TC TCT Rebater

These Cutters produce recesses with a lower rebate - double rebate. Designed to accept library/bookcase strip (Tonk Strip).

Trend TRE34812TC Intumescent Strip Cutter

This Trend Intumescent Strip Cutter is for routing the groove for the intumescent strip in a frame or door.An Intumescent strip is used to create an effective barrier to both fire and smoke. Alternative bearings can be chosen to suit other thicknesses of intumescent strip.  

Trend TRE241014TC 24/ Plug Makers

These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min.

Trend TRE20114TC Single Flute Cutter TCT, 1/4in

Trend Single Flute Cutters are chosen for fast, free cutting when cutting speed takes preference over finish. If you require a cleaner cut, two flute cutters are recommended. Suitable for grooving, rebating, morticing and drilling. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute...

Trend TRE12314TC Radius Cutter

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards.

Trend TRE11314HS 45° Chamfer V-Groove Cutter

Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.