RIDGID RID42878 238-P Powered Soil Pipe Cutter 42878

The Ridgid 238-P Powered Soil Pipe Cutter cuts cast iron soil pipe quickly and easily in tight spaces. It is designed to cut up to 200mm (8in) soil pipe when driven by an impact driver (minimum 340Nm torque) or 100mm (4in) with the included ratchet. The 238-P is lightweight and - at only 6.1kg - it is easy to mount in difficult places. It has...

RIDGID RID46683 K-1 Combination Auger

The Ridgid K-1 Combination Auger provides an all-in-one solution for removing blockages from urinals and shower drains. The auger's dual power operation provides additional power necessary for removing tough obstructions. Its telescoping design provides additional cable length for obstructions that are further down the line. It has a 'C' cutter head that is ideal for breaking up hard blockages. The left-hand wound cable provides strength...

RIDGID RID46753 2017 Telescopic Basin Wrench with Led Work Light 12-32mm Capacity

The RIDGID 2017 Telescopic Basin Wrench has an innovative design that makes working with tap fittings and retaining nuts easier than ever. It has a built-in, water-resistant LED light, that provides direct illumination of your work, with auto-shut off for maximum battery life. The removable, 180° pivoting T-handle allows you easier access in tight spaces, whilst the 3/8in square drive connection lets you use your...

RIDGID RID48297 918 Roll Groover 48297

The Ridgid 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, it is the ideal groover for job site requirements. The 918 mounts quickly to RIDGID 300 power drive and 535, 1822, or 1224 Threading Machines. Designed to provide maximum efficiency, it is capable of grooving up to 12in Schedule 10...

RIDGID RID50072 1450 Test Pump 50072

This Ridgid manual pressure test pump is ideal for leaks in installations which are required to be leak proof. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations. Automatic pressure holding valves enable the system to be easily pressurised. Very low effort required to operate. Maximum pressure: 725 psi.Container capacity: 13.5 litres (water, oil or...

RIDGID RID57018 C15/22 C-Style Copper Cutter 15 & 22mm

The RIDGID C15/22 C-Style 15 & 22mm Copper Cutter is one cutter with a quick-change feature. With a snap-on feature for a quick pipe connection and no size adjustment, saving valuable time. The spring-loaded cutter wheel provides constant pressure on the pipe for fast, straight cuts every time. RIDGID’s X-CEL® Wheel Pin provides quick wheel replacement. No tools or disassembly of the housing required. It...

RIDGID RID58476 58476 TCT Saw Blade for 590L 355 x 25.4mm Bore x 80T

RIDGID Replacement TCT Sawblade for the 590L ONLY. Designed to cut steel, copper, aluminum and plastics with a maximum wall thickness of 6mm. Specification: Diameter: 355mmBore: 25.4mmTeeth: 80

RIDGID RID59787 K-3 Closet Auger 59787

The Ridgid K-3 Closet Auger negotiates water conserving toilets to clear blocked drains. Featuring a durable, kink resistant compression wrapped IC cable, with a vinyl guard to protect porcelain. It has a large, ergonomically designed handle for comfort. Cable width: 12mm.Maximum reach: 1m.  

RIDGID RID60753 PowerClear™ Drain Cleaning Machine 240V

The RIDGID PowerClear™ Drain Cleaning Machine effortlessly cleans bath, shower or sink blockages. Advanced 2-way AUTOFEED® control keeps hands and work area clean. The cable advances and rewinds with the push of a lever. With a clear cover for quick view of remaining cable and an easy pull drain plug that enables draining of excess water, extending cable life. Its lightweight design makes it easy...

RIDGID RID66737 Constant Swing Tube Cutter

The RIDGID Constant Swing Tube Cutter features an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-to-flare cuts, and a fold-away reamer. It has an X-CEL Knob that cuts tubing more quickly and easily with the larger, more ergonomic design. Whilst the X-CEL Wheel Pin helps to change your cutter wheel quickly using the new ball detent design, with no tool needed...

RIDGID RID73442 Model 418 Oiler with 5 litres of oil

The RIDGID Model 418 Oiler has durable pump assembly and a heavy-duty reservoir, that has been designed to increase productivity. The pump assembly allows for 50% more oil per stroke than other hand-held oilers, for a longer die life. The 418 oiler features a patent pending, fastenerless twist and lock drip pan that easily locks in place. The integral moulded body eliminates leaks at the...

RIDGID RID80475 734 Tongue & Groove Pliers 250mm

RIDGID Tongue & Groove (Slip Joint) Pliers feature a flush rivet design which provides a stronger tool and allows access to tighter areas. The pliers have been forged and heat-treated for extended life and durability. Professional quality tools, precision crafted for ultimate balance, high strength and exacting performance. They are fitted with cushioned grips that are designed for comfort only. They are NOT intended as...

RIDGID RID88232 915 Roll Groover 88232

The RIDGID 915 Roll Groover is a manual roll groover for in-place field applications. The 915 requires only 3.1/2in of clearance to travel around a pipe and a minimum of 2.3/4in of exposed pipe for grooving. The easy to use depth setting gauge helps make accurate grooves. The included ratchet has a 90° bend-in handle that makes grooving easier. With the appropriate roll sets, the...

RIDGID RID89435 Heavy-Duty Offset Pipe Wrenches

The RIDGID Heavy-Duty Offset Pipe Wrench has a sturdy, cast-iron housing with an I-beam handle. The jaw opens parallel to the handle and has a narrower hook jaw head. Provides easy entry into tight spots. There is a large flange that prevents the nut from being inadvertently rotated when the wrench is set down.

RIDGID RID92670 Chain Tong

RIDGID Chain Tongs are designed and sized to provide extra leverage for the toughest jobs. All chains are tested to 2/3 of its breaking strength. Model 3215 is a single-end tong but all other models feature double-end jaw styles which can be reversed.