Hultafors HUL10912 109 Steel Wrecking Bar

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.

Hultafors HUL10925TD 109 TD Steel Wrecking Bar 640mm (25in)

The Hultafors 109 TD Wrecking Bar is made from hardened, high quality steel. Wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks. The claw and chisel are optimised for pulling out nails.

Hultafors HUL207400 207 Steel Pinch Bar

The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are...

Hultafors HUL209SB25 209 SB Adjustable Wrecking Bar 640mm (25in)

The Hultafors 209 SB Adjustable Wrecking Bar is manufactured in high quality steel with ergonomic rubber-clad handle. It's articulated claw is adjustable to nine different positions. With wide, ground contact surfaces and thin ends make it easy to use and reduce the risk of leaving marks. The claw is optimized for pulling out nails. The curved section at the chisel makes space for the hand...

Hultafors HUL251003 TMV Carpenters Square

This Hultafors TMV Carpenter’s Square features an epoxy-lacquered steel stock, and millimetre graduations on the upper and lower edges of the blade. Specification:Tolerance: ±1.0 mm/m.

Hultafors HUL252510 PS 90 Adjustable Plasterer's Square 900mm (35.1/2in)

The Hultafors Adjustable Plasterer's Square has millimetre and degree graduations that can be set in 4 fixed positions (22.5°, 45°, 67.5°, 90°). There is an additional 21 angles marked on the scale. The stock and blade are made from anodized aluminium. They can be folded together, making it easy to store and transport, and also be switched between right and left position. Specification: Blade Length:...

Hultafors HUL253120 Quattro Adjustable Square 300mm

The Hultafors Quattro 270 Adjustable Square has a blade which can be rotated to 45°, 90° and 135°. It can also be rotated 270° allowing you to use the opposite side of the stock where there is no slit that, for example, thin sheet metal parts can slide into. In addition, there are markings for 22.5°, 67.5° and 75°/15°. If you rotate the blade 270°...

Hultafors HUL256023 Quattro Bevel Square

The Hultafors Quattro Bevel Square is an innovative adjustable square which also functions as a bevel square and an angle finder. The rotatable blade features fixed positions for 45°, 90°, 135° (180°, 225° and 270°). By rotating the blade more than 180° the opposite side of the stock where there is no slit can be used - for example, to provide a straight edge thin...

Hultafors HUL257010 Rafter Square

The Hultafors Rafter Square allows you to make fast and precise 45° and 90° markings. Solid aluminium body with CNC machined edges for greater accuracy and durability. It has scales for cutting hip, valley and jack rafters. The thick edge can be used as a saw guide - it can be used directly with the saw against the square for cross cuts or angled cuts....

Hultafors HUL257032 MMRS Mini Rafter Square Display, 10 Piece

Hultafors MMRS Mini Rafter Square Display with 10 x MMRS Mini Rafter Squares. The Hultafors MMRS Mini Rafter Square has a solid aluminum body with CNC-machined edges for greater accuracy and durability. Laser etched graduation with great readability and wear resistance. Protective and low-glare anodized finish. The mini and large version has a white area on the back for taking notes. Ruler with metric graduation.​

Hultafors HUL260103 V Professional Try Square

The Hultafors Professional Try Square comes with a 1.5 x 45mm stainless steel blade, and has millimetre graduations on the upper and lower edges of the blade.Graduations are deeply etched and are highly resistant to wear. Its anodised aluminum stock features an 18mm wide milled working surface. Specifications:Length: 300mm (12in).Blade Size: 1.5 x 45mm.Tolerance: ±0.03 degrees.

Hultafors HUL260303 Professional Square

This Hultafors Square has been built for precision and durability. Excellent for construction, workshops and carpentry work. Unique assembly technology with strong custom riveting and a 1.5mm thick high-strength stainless steel blade. This provides an extremely durable design which can withstand tough working environments and will last a long time. The stock is made of fully anodized aluminum with a 18mm thick handle. Its high...

Hultafors HUL265203 52ME Combination Square 300mm (12in)

The Hultafors 52ME Combination Square can be used as an outside and inside try square, mitre square, depth and marking gauge. It has a stainless steel blade with ground edges, and ends marked in millimetres and inches. The lightweight zinc stock is matt black and is fitted with a scriber. Specification: Size: 300mm (12in)

Hultafors HUL265803 58ME Combination Square 300mm (12in)

The Hultafors 58ME Combination Square has a lightweight zinc stock and rule with ground edges and ends. Its centre head enables the accurate location and marking of the centre of circular items. The graduated protractor head can be turned through 360° for measuring and constructing angles. For use outside and inside as a try square, mitre square, depth and marking gauge. Specification: Size: 300mm (12in).

Hultafors HUL310303 Lightweight Square

This Hultafors Square has been developed to be both light and durable. Ideal for anyone who often carries a square in their pocket. There is also a hole for attaching the tool to a safety lanyard or for wall hanging. Its precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.06° (±1 mm/m). The millimeter graduations have been laser...